DX6 settings for dual esc...help?

[slip408]

I was wondering if anyone is using a DX6 radio for dual esc...I wanted to see how its done on the mixing...and the difficulties of driving one...

[JeremyH]

Well, it takes some getting used to if you have not used a stick radio much, but with practice you'll get better. As for the settings, I used the Throttle/Rudder (left) stick for the front motor and steering servo and the Aileron (right) for the rear motor. I am using this on my dual ESC 2.2 comp clod (not 4WS). Here is the manual for that radio (in case you didnt get one) which will help with programming:
http://www.spektrumrc.com/ProdInfo/F...nual-LoRes.pdf

[constantmotion]

Here's Jason's write up on the Dx6

http://www.rccrawler.com/dx6.html

[slip408]

Originally Posted by JeremyH

Well, it takes some getting used to if you have not used a stick radio much, but with practice you'll get better. As for the settings, I used the Throttle/Rudder (left) stick for the front motor and steering servo and the Aileron (right) for the rear motor. I am using this on my dual ESC 2.2 comp clod (not 4WS). Here is the manual for that radio (in case you didnt get one) which will help with programming:
http://www.spektrumrc.com/ProdInfo/F...nual-LoRes.pdf

Thanks Jeremy...I first start with stick radio from Tyco, but this radio is beyond belief of all the controls and capabilities it has...

Originally Posted by constantmotion

Here's Jason's write up on the Dx6

http://www.rccrawler.com/dx6.html

Nice...appreceiate the help guys...

[JeremyH]

Originally Posted by slip408

...this radio is beyond belief of all the controls and capabilities it has...

Haha....that is an understatement!

Good luck.