| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
03-12-2009, 11:01 PM
| #1 |
| Quarry Creeper Join Date: Jan 2008 Location: Portland OR / SLC
Posts: 462
|  MRC radio and receiver with sidewinder esc/cc bec/hitec 125$servo/ 2s lipo??
so basicly im missing an receiver for my comp rig. and im wondering if i can use the stock MRC radio and receiver with those electronics? thought id ask before i blew myself up testing =P if it does work, do i plug the bec into the AUX port or BIND port on the receiver? thanks for any help.  |
|  |
| Sponsored Links | |
| | |
|
03-13-2009, 02:43 AM
| #2 |
| Rock Crawler Join Date: Feb 2009 Location: Surprise, Az
Posts: 848
|
the bind pins are to bind the rx with the radio
|
|
| |
|
03-13-2009, 06:06 AM
| #3 | |
| Quarry Creeper Join Date: Jan 2008 Location: Portland OR / SLC
Posts: 462
| Quote:
 | |
|
| |
|
03-13-2009, 06:25 AM
| #4 |
| Just jump it!   Join Date: Aug 2008 Location: Cedar City, Utah
Posts: 1,947
|
I am using my mrc electronics in my play rig and it has a slot for bind/ batery. That is were you would plug the bec in, but you must pull the red wire out of the esc plug or it will cook something.:-(
|
|
| |
|
03-13-2009, 12:44 PM
| #5 |
| Rock Crawler Join Date: Sep 2007 Location: Colorado Springs
Posts: 960
| hitec 125$servo
If you are using a high dollar servo. Remember that the MRC radio does not have any endpoint adjustment. You could be setting that high dollar servo for a short life. Setting the endpoints on your servos is something not to overlook. Just a thought |
|
| |
|
03-13-2009, 12:57 PM
| #6 |
| Keep it real   Join Date: Jun 2006 Location: Yakima,WA
Posts: 6,532
|
You can use the dualrate steering dial on the stock MRC radio to in effect set your endpoints. Might not endup getting exactly the same amount of throw both directions though.
|
|
| |
|
| |
Linear Mode
