| |
12-25-2009, 05:12 PM
| #1 |
| I joined the Band! Join Date: Jul 2009 Location: why do you care?
Posts: 75
|  problem with the esc.
So i have just installed a tamiya teu-101bk and as i tried to follow the directions it would not work. As i turned it on the red led would flash once and then flash non stop. When i held down the set button it didn't seem to do anything. i just need some help on what to do, so if you know anything about this let me know.
|
|  |
| Sponsored Links | |
| | |
|
04-19-2010, 04:27 PM
| #2 |
| Newbie Join Date: Apr 2008 Location: Glastonbury
Posts: 18
|
Having the same problem with my cc01 cant seem to figure it out did you ever figure out how to fix it?
|
|
| |
|
04-20-2010, 06:15 AM
| #3 |
| Quarry Creeper Join Date: Oct 2007 Location: Ft. Wright, KY
Posts: 435
|
Do you have steering, but just no throttle? Check you throttle trim on you remote. Plug the truck in, and slowly rotate the trim knob in one direction. If nothing, go back slowly the other direction untill you here the speedo "Arm" itself (beeps). That should be it. This is a saftey feature on speedo, if you have your finger on the trigger when you plug it in it wont take off on you. If not re-calibrate the speedo per manual. What kind of radio do you have? |
|
| |
 |
| |
Linear Mode
