04-16-2010, 04:23 PM | #1 |
Quarry Creeper Join Date: Nov 2006 Location: omaha
Posts: 323
| Lipo Eflite 11.1v
Here is the battery I just got used. http://www.hobbymasters.com/e-flite1...atteryjst.aspx Witch side do I charge with. They have the same plug on each side. Thanks for helping me...I know its of a newb quesion. |
Sponsored Links | |
04-16-2010, 06:54 PM | #2 |
Quarry Creeper Join Date: Nov 2006 Location: omaha
Posts: 323
|
So do I charge with the thin wires or heavy wires. Or does it make a difference? Thanks |
04-16-2010, 06:59 PM | #3 |
RCC Addict Join Date: Mar 2007 Location: MS Gulf Coast
Posts: 1,949
|
Not familiar with these batts. I think maybe the shorter thinner wire connector is the balance tab and the longer thicker wire connector is the one you charge with. |
04-16-2010, 07:42 PM | #4 |
RCC Addict Join Date: Jul 2009 Location: reelsville
Posts: 1,871
|
That pack is 7 amp cont. and 12 amp burst, it won't work any better for you than it did the guy you bought it from.
|
04-16-2010, 07:45 PM | #5 |
Quarry Creeper Join Date: Nov 2006 Location: omaha
Posts: 323
| |
04-16-2010, 08:13 PM | #6 |
RCC Addict Join Date: Jul 2009 Location: reelsville
Posts: 1,871
|
It's strong enough for a micro, maybe a mini, heli's don't bind the blades up in rocks and need to drive out.
|
04-16-2010, 09:15 PM | #7 |
Quarry Creeper Join Date: Nov 2006 Location: omaha
Posts: 323
| |
04-17-2010, 12:55 PM | #8 |
Quarry Creeper Join Date: Oct 2007 Location: Ft. Wright, KY
Posts: 435
| |
04-17-2010, 01:14 PM | #9 |
Pebble Pounder Join Date: Feb 2005 Location: Chandler, AZ
Posts: 110
|
if both plugs only have two wires, neither is a balance tap. A 3s balance tap requires 4 wires. 3s lipos with no balance taps do exist, but it scares me to charge them |
| |