XR4 4 channel Does anybody have this? Seems like a great price at $90. http://www.rpphobby.com/PhotoDetails...ode=RC4Z-R0006 |
I heard its junk, what are you trying to do? |
i just want a simple 2.4 rx & tx with a true 3 position 3rd ch. with EPA's to operate my dig servo. i have a new traxxas 4 ch., but learned that the toggle is not a 3 position (for single servo) and has no EPA's. Is it really junk? |
Hold the phone, i think i just found a solution. Electronics guys are the bomb! http://wantasummit.com/default.aspx Will look into this more. Interested in how it works. i guess you adjust the three pots with the toggle on the RX? |
ive got the xr4....For the price it is well worth it, have not had a single problem with it and I like the location of the 3rd channel switch much more than like the dx3e"thumbsup" |
The Radio doesn't have EPA's on the 3rd and 4th Channel... So if you ran running a Digital Servo on those Channels. You will need one of these.. http://www.servocity.com/html/180o_servo_stretcher.html So for a Super.. Channel 3 can be used with a PUNK DIG Channel 4 use this with a Rear Steering Servo For a XR10 Channel 3 PunkDig Channel 4 Use this and a Servo for Cutting Brakes. XR4 -4 Channel Rc4wd Radio http://www.jpcustomrcs.com/catalog/i...89/8177233.htm I have been using this on my 1.9 Comp Rig. No Problems at all. Feels nice in the hand and controls very easy. http://www.jpcustomrcs.com/catalog/i...89/8385128.htm |
i have been lookin at 1 of these 4 mine so i can set up my rear steer. any thoughts on them????? http://www.rcrockcrawling.com/produc...roducts_id=884 |
Quote:
|
do they do the same thing as the other 1??? sorry a little new 2 this all |
so i kinda worked it out i think! i would wanna run my rear steer off channel 3! so it does the same as the other remote! and off channel 4 a i can run a punk dig! im lookin at up grade my steerin servos as i just broke mine! so i need a new 1 and now im gunnna do rear steer so i need 2. been lookin at these http://www.enjoyhobbies.biz/servo/cy...tal-gear-servo and am i right in sayin i wont need 1 of those servo stretchers like above??? cause them servos arent digital are they?? |
Quote:
The XR4 would give you 4WS and DIG... If you have a Shafty you would need two of those Servo Stretchers. If you running a MOA. You should only need one to run the Rear Servo for Rear Steer. |
so if u run my rear steer off channel 3 it will work like the other control! and i can use channel 4 for a dig set up! im not runnin digital servos so i shouldnt need a servo stretcher like mentioned above? im gunna run a 5 amp bec. how will all this go on normal batterys as i dont run lipos yet?? im runnin a MOA |
Quote:
|
so its recommmend i run at least 1? so they just stop the servo from going 2 far? |
"JACKED", but thrilled it went past 2 posts.:lmao: i think i'm going to try the wantasummit adaptor because i already have the TQ4. Then i can post a review."thumbsup" |
sorry about the hijack man! i just thought i would get in while i could lol |
Quote:
"thumbsup" No worries man, i was just ribb'in you. i actually learned a little more about the radio you were ask'in about. Are you gonna pick one up? (thread cpr :ror:) |
yea man already order it and a bec from him! and dig from punk rc!lol |
Quote:
i have a tq2.4 4ch (use it on my summit) and wanted to use the radio for my venom creeper with dig and remote diff lock. the adaptor works perfect for getting a true 3-pos 4th channel. if you already have the radio it's worth the $30 versus a whole new radio. |
All times are GMT -6. The time now is 03:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com