|
| LinkBack | Thread Tools | Display Modes |
12-25-2010, 07:54 PM | #1 |
Quarry Creeper Join Date: Aug 2008 Location: Up your tail kicking footballs!
Posts: 201
| 7T Puller or Scorpion questions!!
Looking into either running a HH 7T puller or the Scorpion hkii-2221-8 and am looking for some feedback on these. Truck is a 8lb scaler running a Axial tranny with 20/87 gearing on 2.2 Mashers with a CC Sidewinder ESC on 3s 1700 35c lipos. Looking for a little more wheel speed than my Fantom Blitz Handwound 35t I am currently using. Very little rock use more of a trail and dirt hill climber. Thanks for everyones help and sugestions with this. |
Sponsored Links | |
12-25-2010, 10:04 PM | #2 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
|
If you are willing to sacrifice some low speed control, the HK2221 will really pack a punch for the weight. The 7t puller will have a lot more torque however. Both will have more wheelspeed than your 35t. I say both will do very well. It just depends on the low speed control you want, plus you could shed a few high ounces of weight with the 2221 outrunner. |
| |