| |
01-01-2011, 04:57 PM
| #1 |
| Newbie Join Date: Apr 2010 Location: surrey bc
Posts: 45
|  crawler servo?
I'm needing two high torque servo's for a crawler with rear steer. In my searching I came accross these savox servos, seem pretty good for the price, just wondering if anyone has tried these yet and what they think of em?http://www.rpphobby.com/product_p/savsc1268mg.htm |
|  |
| Sponsored Links | |
| | |
|
01-01-2011, 06:59 PM
| #2 |
| Newbie Join Date: Dec 2010 Location: Fountain, CO
Posts: 28
|
Don't have any experience with them, but just noticed it's a high-voltage servo. You'll need 7.4v to get the full torque, and hopefully an ESC/BEC that can feel it the amps it needs. For about the same price you can get a Hitec 7955, and only need 6v to feed it.
|
|
| |
|
01-01-2011, 08:14 PM
| #3 |
| I wanna be Dave Join Date: Oct 2006 Location: Centered
Posts: 2,082
|
I have a buddy using Savox SC-1256TG servos in his 1/8 Mardave Nitro Oval car...loves them.
|
|
| |
|
01-03-2011, 06:59 AM
| #4 |
| Rock Stacker Join Date: May 2009 Location: Belo Horizonte -Brazil
Posts: 64
|
I use the Savox 1256 on my AX-10 and I like it.. My BEC is only 6v and the servo turns great, whit 7,4v would be awesome.
|
|
| |
|
01-03-2011, 07:03 AM
| #5 | |
| Newbie Join Date: Dec 2010 Location: Fountain, CO
Posts: 28
| Quote:
- Torque(@6.0V oz-in): 208.3 - Torque(@7.4V oz-in): 361.0 That's a huge loss if you aren't running the 7.4v. I'd personally get the Hitec I mentioned. | |
|
| |
|
01-03-2011, 07:14 AM
| #6 |
| RCC Addict Join Date: May 2008 Location: Chicago/Bloomington
Posts: 1,505
|
Or the Hobbico CS-170 333oz/in @ 6V $89.95 |
|
| |
 |
| |
Linear Mode
