| |
04-02-2011, 11:57 AM
| #1 |
| Rock Stacker Join Date: Mar 2011 Location: west
Posts: 73
|  Something is wrong...
I changed motor in my crawler and went to test it and when I plugged everything in and turned it on......the motor would just spin away...so I installed everything back into the chassis and plugged it back in....and it kinda whines some than nothing....when I turn the power switch on the axels torque some and than nothing??? I am using the losi 2.4 system. This has me baffled, could it need binding??
|
|  |
| Sponsored Links | |
| | |
|
04-02-2011, 03:03 PM
| #2 |
| I wanna be Dave Join Date: Sep 2008 Location: four o six
Posts: 2,101
|
take the motor out and spin the axles...then spin the spur gear...if its free, then no, no binding...what is the motor?? is it new? needs rebuilt?? hows the brushes?
|
|
| |
|
04-03-2011, 07:18 PM
| #3 |
| Rock Stacker Join Date: Mar 2011 Location: west
Posts: 73
| ooops!
the wheels were to tight.....seems there is ext hexs on the hub. axles are short and when you get a little tight the wheels lock up.......  will find some ext hubs and problem solved.kinglooie |
|
| |
 |
| |
Linear Mode
