04-10-2011, 12:48 PM | #1 |
Rock Stacker Join Date: Jan 2010 Location: mount vernon
Posts: 88
| traxxax rx
I have an Axial ax10 with a busted rx. I also have a Traxxax summit. If I buy a Traxxas rx and put it on my ax10 and use the same transmitter for both trucks will I have to reprogram the rx every time I switch trucks. I am looking for an inexpensive way to get th ax10 working without replacing broken parts with the same crap.
|
Sponsored Links | |
04-10-2011, 10:24 PM | #2 |
Quarry Creeper Join Date: Oct 2009 Location: Indiana
Posts: 235
|
The book for my 2.4GHz revo says up to twenty models. I think your good. If its a TQ2 or TQ3 I think your out of luck.
|
04-10-2011, 10:26 PM | #3 |
Pebble Pounder Join Date: Jul 2007 Location: Alberta, Canada
Posts: 103
|
if it is not the 2.4 system i would use 2 different crystals for the trucks and use the corresponding one in your tx for whih ever
|
04-11-2011, 05:39 PM | #4 |
Rock Stacker Join Date: Jan 2010 Location: mount vernon
Posts: 88
|
Thanks I bought the summit used with out the book or anything. I have the 4 channel 2.4 model.
|
04-12-2011, 07:10 PM | #5 |
Newbie Join Date: Mar 2011 Location: Olympia
Posts: 6
|
The Traxxas 2.4 Transmitters will hold up to 20 different reciever codes, so if you buy a Traxxas 2.4 rx, you can program that as a second rx in your tx. Just won't be able to run both at the same time
|
04-12-2011, 07:28 PM | #6 |
Pebble Pounder Join Date: Feb 2011 Location: Monticello
Posts: 173
|
Just make sure you get the newer style Rx that says Traxxas Link on it, #2218 I believe. The older Traxxas 2.4 stuff isn't compatible with the Traxxas Link 2.4 stuff. I made that mistake the first time I bought a Rx and couldn't figure out why it wouldn't bind
|
| |