RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Electronics (http://www.rccrawler.com/forum/electronics/)
-   -   FXR and FXR pro (http://www.rccrawler.com/forum/electronics/314356-fxr-fxr-pro.html)

b_atman 04-30-2011 12:28 PM
FXR and FXR pro
 
whats the difference between these two esc's
i cant seem to find any differences in the specs

TexasSP 04-30-2011 12:55 PM
The pro has more power handling as it uses double the mosfet's.

b_atman 04-30-2011 04:47 PM
so is it worth $25 difference in price? i need 2 so that would be $50

AreCee 04-30-2011 10:16 PM
That will depend on the motors you use. I'm using two Tekin FX-Rs with two Tekin 55T motors on 3S lipo with a CC BEC. No problems.

Now if I wanted to use a 10T modified motor it may cause a problem. The Pro is made for low wind motors. However, both the FX-R and the Pro on 3S are recommended to use 35T and higher winds. On 2s the FX-R has a 13T limit whereas the Pro has no motor limit.

undivided 04-30-2011 10:21 PM
i thought if you had a fxr you could only run 2s
and the fxr pro was 3s

BadRockNoCookie 05-01-2011 01:58 AM
Quote:
Originally Posted by undivided (Post 3071030)
i thought if you had a fxr you could only run 2s
and the fxr pro was 3s
Nope, you can run 3s on the regular FXR.

TexasSP 05-01-2011 06:40 AM
Quote:
Originally Posted by b_atman (Post 3070592)
so is it worth $25 difference in price? i need 2 so that would be $50
If it's on a crawler no.

b_atman 05-01-2011 09:28 AM
yes these would go in an xr10

b_atman 05-03-2011 03:08 PM
can one fxr run 2 35t motors? till i can get a second one

khwilliams 05-03-2011 06:15 PM
Quote:
Originally Posted by b_atman (Post 3075805)
can one fxr run 2 35t motors? till i can get a second one
Yes "thumbsup"


All times are GMT -6. The time now is 11:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com