RCCrawler Forums - HH BRXL motor leads

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Electronics (http://www.rccrawler.com/forum/electronics/)

- - HH BRXL motor leads (http://www.rccrawler.com/forum/electronics/333122-hh-brxl-motor-leads.html)

inkdaddy66

08-23-2011 06:49 PM

HH BRXL motor leads

I'm setting up my xr10 with 2HH 454pullers and a brxl. I've got everything soldered and now that I'm checking with my multimeter. I don't have any power at the motor leads. I'm also not getting any beeps from the motors for programming. I believe due to the power not getting to the motor through the leads. Continuity is there. Just no power. Any suggestions and/or help?

Tbolt meatclaws-talkatap

Charlie-III

08-23-2011 07:11 PM

Is the radio on?
Is the battery charged?
Is the ESC calibrated to the RX?
Is the ESC set for brushed mode?
Does the steering work (trying to rule out radio issues)?

inkdaddy66

08-23-2011 07:32 PM

Quote:

Originally Posted by Charlie-III (Post 3245703)

Is the radio on?
Is the battery charged?
Is the ESC calibrated to the RX?
Is the ESC set for brushed mode?
Does the steering work (trying to rule out radio issues)?

Radio. Yes
Battery charged. Yes
I can't calibrate due to no beeps from motors
its a brushed only esc. No?
Steering works.

Tbolt meatclaws-talkatap

inkdaddy66

08-23-2011 07:56 PM

Problem smashed. Thanks Meatwad

Tbolt meatclaws-talkatap

Meatwad

08-23-2011 07:57 PM

You had it man. Simple programming issue

Glad its goin for you now "thumbsup"

All times are GMT -6. The time now is 09:19 AM.