Motor or esc problems I have a traxxas 12t with a 20t pinion and everything i go to full throttle and slam it into reverse it glitches then i have to wait a few seconds to get it to go again. Im not using a bec or a dig and im using a 3000 nimh battery. And info on what causes this or how to dix it would be helpful. Thanks everyone |
Re: Motor or esc problems Does your steering work while you wait? |
Re: Motor or esc problems Yes it does |
Re: Motor or esc problems Sounds like a loose connection or it's hitting the LVC. When you let it sit, the ESC comes back on as the battery voltage rises. Maybe you need a better battery (higher "C" and/or mah). Or, don't slam it into reverse from high speed forward. |
Re: Motor or esc problems Some one told me that the motor has a fail safe in it and the esc cant handle any motor under a 15t |
Re: Motor or esc problems If you were bashing it good and overheated the motor you could have damaged the esc. Just went through this with my sons slash. Changed the motor because I figured it was damaged because the heat and ended up needing to replace the esc. We have a brushless system BTW if it makes a difference and were at a track running it on 3cell tearing it up. |
All times are GMT -6. The time now is 11:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com