setting up the esc
 

I'm new to crawlers and have a question about the castle creations sv2. What should I set everything at and do you have to have your battery hooked up to the esc to program it? :mrgreen:"thumbsup"

Re: setting up the esc
 

That depends on if you are using the Castle Link or not.

If not I wont be much help, I have always used the link.

If you are running LIPOs make sure that your lipo cutoff is set to auto lipo. Obviously you want instant reverse and a decently high drag brake setting. You will have to play around with it a bit and see what works best for you.

Re: setting up the esc
 

Not sure how it compares to the momba as far a programmability but if it has crawler reverse Id use that. I think that one is geared more for short course racing but not sure I put the momba in everything. You start out with the basic then go to power and so on. It easy. If you have a field programing card you need to have the bat connected but for the pc you don't.