FXR Throttle profile
 

I changed the throttle profiles in my dual FXR's from 3 to 1, and my 800mah 3s Lipos only last about 5 minutes now, and take only about 300mah to charge them back fully.
I changed the TP's to the number 2 setting, and everything is back to normal again.
The lipo cutoff is set at #3 and has been set there the entire time.
Any clues as to why this is happening?

Re: FXR Throttle profile
 

Because you set the profile from 3 to 1. :mrgreen:






There's something wrong in the software possibly. You should send them an email, they might like to know about that.

Maybe someone here will try to replicate it.

Re: FXR Throttle profile
 

So you went from Throttle Profile 3 (linear) to 1 and it would only run for 5 minutes? Your voltage cutoff should be set for 9V for a 3S, not 3V, or #3 on the Voltage Cutoff setting.

Re: FXR Throttle profile
 

Yep, exactly.

The 3V was a typo sorry, it is set @ #3.

Re: FXR Throttle profile
 

wierd!!!

I changed my brake profile to 1 from 3. Now it goes in reverse super smooth and controlled instead of jumping into reverse.

Try it with a known fully charged battery just to make sure it wasnt a fluke.

Re: FXR Throttle profile
 

I just went to TP 2 and I can live with it, but I'd sure like to use 1 for the same reason as you, smooth reverse! "thumbsup"

I'll try it again here in a little while with another battery, maybe it was a fluke x 2 (I did it yesterday with two seperate batteries).

Re: FXR Throttle profile
 

If you want smooth reverse change the "brake profile" to 1. The throttle profile only effects forward, not reverse.

Re: FXR Throttle profile
 

I did change the throttle and brake profiles, both of them to 1.

Re: FXR Throttle profile
 

OH. Got it...

You can dial in some -expo on your radio to counter having to run the throttle profile on 2 or 3.

Re: FXR Throttle profile
 

Expo's are both set to -100, but I'd sure like that TP 1 also! :mrgreen:

Re: FXR Throttle profile
 

Got it working right now! "thumbsup"




I had to put 3 quarters in my left pocket, only use my left hand, and chant loompa loompa loompa while programming the FXR's, worked like a champ!

Re: FXR Throttle profile
 

What did you end up doing? I tried to get my FXRs to have the same problem you saw but could not get them to do it.

Re: FXR Throttle profile
 

I just reprogrammed both of them, the third time worked perfect, go figure?
I used the same battery all three times too, just a glitch I guess.