novak m2 dig problems In need of some help! When I program my m2 dig the third channel seems to work fine but when I have it in 4x4 and turn left it digs front and when I turn right it digs rear! Any help would be much appreciated thanks! Oh Ya this is on a xr10!!!! |
Re: novak m2 dig problems Did you use the 3rd channel for a rear steer setup in the past. Sounds like the 3rd channel is slaved to the steering channel somehow. What TX? |
Re: novak m2 dig problems It's a spectrum 3c. |
Re: novak m2 dig problems Hello not be if I explain well through the translator... looks to the issuing credit if you have menu in mixing or st post mix to mix channel 1 with the aux. If you have desconectalos the two. of Anyway, some fellow confirm you a greeting"thumbsup" |
Re: Novak M2 dig problems Quote:
Quote:
When I read the 1st post, I was thinking it was a mixing issue. Jason, I would suggest using a different "model" and see if you still have the same issue. What we're all getting at is that the TX may have a "bug" and is trying to do something you're not expecting. PS, I had an M2 dig......didn't do what I wanted, thus sold it.8) |
Re: Novak M2 dig problems Quote:
"thumbsup" |
Re: novak m2 dig problems Well I figured out that the mixing was turned to sleeping and I programmed it for the dig so it was messed up there! Now I have a bad glitch but not all the time. When I go from front or rear dig to 4x4 it glitches between the two and if I'm spinning tires on a rock face for any amount of time it's like the esp shuts off completely and it either just stalls on the rock or rolls off of it! Thanks for all the help guys and if u have any further ideasfor my troubles they r greatly appreciated! Maybe the m2 is just not for me!!! |
Re: novak m2 dig problems Are you running a BEC? What servo? |
Re: novak m2 dig problems Castle bed and hitec 7955tg steering servo! |
Re: novak m2 dig problems Hello I had it mounted and worked me well. have the castle bec to 6v series comes to 5.1V think "thumbsup" |
All times are GMT -6. The time now is 11:38 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com