mmp tekin roc setup issue
 

so i got my roc today and shit wont work the motor just studders and the drive shafts only turn 180* idk what the issue is the esc wasent arming also i know its prob somthing im doing wrong but it worked fine today with my brushed motor now after i change the setting to brushless it isnt working im so frustrated i could punch a kitten anyone have a idea

Re: mmp tekin roc setup issue
 

i would go through the esc setup again.

Re: mmp tekin roc setup issue
 

i have i even reset to default and it still just kinda vibrated back and forth

Re: mmp tekin roc setup issue
 

Check your sensor cable. Make sure ESC is in sensored only mode.

Try running it without the sensor cable plugged in. ESC can be set to Smart Sense.

If the motor works, its most likely the cable. Also double check ESC to motor wires, A-A, B-B and C-C.

Re: mmp tekin roc setup issue
 

i think it might of been the sensor cable i took it out and back in and it works and shit cock is it fast waaaaaaaay fast in a scx10

Re: mmp tekin roc setup issue
 

thanks for all the help guys and is no insta reverse a brushless thing

If you want instant reverse, set to "crawler reverse" in the programming. Be careful though, slamming a high powered brushless right into reverse is a good way to break driveshafts and strip gears.

Re: mmp tekin roc setup issue
 

Definitely check A-A, B-B, and C-C and sensor cable. The cable is tough to plug into motor and ESC. Don't push too hard or you'll snap the connector off the ESC (don't ask me how I know :( )

Re: mmp tekin roc setup issue
 

I'm looking for a FAST setup for my Ridgcrest I have a HH 27t Torquemaster with a BRXL and that is a sweet set up but I want fast, 4s kinda speed. Do you think your set up is worth me looking at?

Re: mmp tekin roc setup issue
 

hell yea i dont even think i could control it on 3s or 4s

Re: mmp tekin roc setup issue
 

so what exactly do you have for a Speed controller and what motor are you running? I will need to get it all since my speed controller is for brushed only. I have 2s, 3s and 4s to use if I want.

Re: mmp tekin roc setup issue
 

I hve a mamba max pro with a tekin roc 3100kv

Re: mmp tekin roc setup issue
 

It's definitely good in the Wraith. I'm running 12/58 right now in 32 pitch gears. Speed on 2s is good and 3s is great.