7950 Bec voltage
 

My wraith kit and parts will be here soon and I am trying to prepare. I have my cc Bec and link already. So I thought I would pre program it to be ready. I have a 7950 on the way. I just want to know what voltage to set at. Will be running 3s. I am thinking 7.4v. Does that sound about right?

Re: 7950 Bec voltage
 

Should be good. I run mine at 7V and it never gets hot. I run a 1.9 scaler thats weighs in at about 7lbs.

Re: 7950 Bec voltage
 

I run my 7950 at 7.4 volts and it works fine and no heat problems.

Re: 7950 Bec voltage
 

With the overload turned on i run all my hitec hv servos at 9 volts on my comp rigs and 8.2 on the rest . Under heavy use they warm up but i have 10plus and have yet to have one fail electrically.

Re: 7950 Bec voltage
 

Cool, thanks. I definitely didn't want to undervolt, so I thought 7.4 was good. I'm pretty sure that will be plenty powerful enough for some crawlin and little bashing. I can't wait for this thing to come. Mmp, 3300, all RR plus sh#tload of other stuff. This is my first crawler. We'll any rc for that matter in over 20 years. Like a kid again!