Factory Wraith issue My Buddy has a Wraith that all of a sudden has no throttle response forward or reverse. It does however have steering. He has tried to re-bind the radio without any results. I am thinking it maybe the ESC. I have no experience with the factory Axial ESC's at all. All of my Rigs have got after market units. All right, lets hear your thoughts. |
Re: Factory Wraith issue Try to recalibrate the ESC to the RX, that sounds more like the issue since the steering still works (thus the RX is likely still bound to the TX). Usual calibration is: TX throttle trims to "0" TX throttle EPA's to "100%" TX on, hold full throttle, power up ESC. Hear the "chime", go to full reverse, hear the chime, go to neutral, hear the chime and then the "arming". You sometimes have to cycle the power off/on on the rig so it works. |
Re: Factory Wraith issue You'll also get steering but no throttle when you hit LVC. I know it's a dumb question, but does it do that with a fresh battery as well? |
Mine has had that issue too, it ended up being the batt. Plug. I took a little screwdriver and reshaped the plug to make good contact again and it worked fine after that. |
All times are GMT -6. The time now is 02:35 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com