RCCrawler Forums - Airtronics M8 conversion Help

RCCrawler Forums (http://www.rccrawler.com/forum/)

- Electronics (http://www.rccrawler.com/forum/electronics/)

- - Airtronics M8 conversion Help (http://www.rccrawler.com/forum/electronics/453972-airtronics-m8-conversion-help.html)

Duce8281

07-19-2013 03:36 PM

Airtronics M8 conversion Help

Any of you guys know anything about the Airtronics M8 TX. I found some info on upgrading them to the 2.4 system but I am not sure where to get the parts or what receivers I can use with it. Any info would be a big help.

JokersWild

07-20-2013 12:49 AM

Re: Airtronics M8 conversion Help

You are converting a fm radio to 2.4...... You are adding a module to the radio being 2.4 dsss and will need to use 2.4 dsss rx. This is the same for m8 and m11 tx. Just an fyi there is a slight delay from signal..... You can tell if you run really fast onroad. If not you may not notice. I did with m11 long ago.....

Airtronics Module - M11/ M8 Tx 2.4GHz DSSS

All times are GMT -6. The time now is 07:24 AM.