05-01-2013, 03:14 PM | #1 |
Fan of wheelspeed Join Date: Jun 2011 Location: Southern IN
Posts: 3,369
| CLAW winch help.
Hey guys. I've been looking for over 30 minutes for a answer. I've found multiple threads and sites that have some basic info on the winch, but nothing but "Plug and play" info on the controller. Ive got a CLAW winch coming with the controller. My question is, will it work with my non-hacked Flysky gt3b? Right now I have a Heyok controller on one of my other rigs with a 3R winch. Will the stock CLAW controller work just like my Heyok controller with the GT3B? Or will I need to order another Heyok controller?
|
Sponsored Links | |
05-01-2013, 03:15 PM | #2 |
Scale Detail Engineering Join Date: Apr 2010 Location: Turtle Island
Posts: 5,573
| Re: CLAW winch help.
I'm pretty sure it works the same way as Heyok's 3 position controller.
|
05-01-2013, 03:21 PM | #3 |
Fan of wheelspeed Join Date: Jun 2011 Location: Southern IN
Posts: 3,369
| Re: CLAW winch help.
Thanks Johnny. Sounds like my stock 2pos 3rd channel wont work then. Anybody else know for sure?
|
05-01-2013, 03:24 PM | #4 |
I wanna be Dave Join Date: Jan 2004 Location: Austin Texas
Posts: 3,866
| Re: CLAW winch help.
I'm 99% (short of owning one) sure that its a 3pos.
|
05-05-2013, 09:56 AM | #5 |
Rock Crawler Join Date: Nov 2009 Location: Southern, IN
Posts: 862
| Re: CLAW winch help.
You can't go wrong with the HeyOK controller, he has one for 2 position switch radios. Edit: Here it is... Winch Controller for Radio with 2 Position Third Channel Edit#2: After re-reading, you may already have this one? Last edited by Turn'Nburn; 05-05-2013 at 12:29 PM. |
05-05-2013, 11:28 AM | #6 |
I wanna be Dave Join Date: Dec 2006 Location: Goin broke losing weight.....
Posts: 2,262
| Re: CLAW winch help.
Mine is a 3pos controller
|
05-31-2013, 06:10 PM | #7 |
Rock Crawler Join Date: Jan 2007 Location: monson
Posts: 651
| Re: CLAW winch help.
I use a GT3B myself. just set up the 2 pos switch for neutral and spool in. then you only freespool out and wind in. works great. -500 |
05-31-2013, 06:14 PM | #8 |
Moderator Join Date: Jan 2004 Location: chicago
Posts: 2,814
| Re: CLAW winch help. |
05-31-2013, 07:42 PM | #9 |
Rock Crawler Join Date: Jan 2007 Location: monson
Posts: 651
| Re: CLAW winch help.
that's true it is. possibly going to do another run soon. looking for new machine shop. |
05-31-2013, 08:10 PM | #10 |
Fan of wheelspeed Join Date: Jun 2011 Location: Southern IN
Posts: 3,369
| Re: CLAW winch help.
I have the winch mounted and all wired up with a Heyok 2 pos controller. I've had 3-4 of these controllers now and I can vouch for the quality.
|
09-21-2013, 12:00 AM | #11 |
Pebble Pounder Join Date: Nov 2011 Location: Kittanning
Posts: 181
| Re: CLAW winch help.
Im still trying to figure out if the winch will handle 3s?
|
09-21-2013, 03:00 PM | #12 |
RCC Addict Join Date: Nov 2009 Location: New Wilmington, PA
Posts: 1,234
| Re: CLAW winch help.
It is not the winch is self you have to worry about with 3 cell, its the controller. I've ran a 3 racing and rc4wd winch on 3 cell with great results using a HV heyok controller. If your running the HV heyok controller you'll be fine with on that side. you'll probably wear out the motor quicker running 3 cell, but It will give you more speed. |
09-21-2013, 07:13 PM | #13 | |
I wanna be Dave Join Date: May 2007 Location: Vancouver, BC
Posts: 2,379
| Re: CLAW winch help. Quote:
To run 3S, get the 4 amp relay output winch controller: Winch Controller - Relay Driven - External Power | |
09-21-2013, 08:05 PM | #14 |
Pebble Pounder Join Date: Nov 2011 Location: Kittanning
Posts: 181
|
I have the one that came with the winch I think the one that u bought with the winch.. and I need to know if the winch can even Handel 3s Sent from under the sheets |
CLAW winch help. - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
**Preview Center Of Mass Designs CLAW 128 Winch ** | 500swmag | General Scale Talk | 36 | 12-17-2009 03:33 PM |
| |