New 4 channel Spektrum, Dx4c
 

Is this news ? I couldn't find anything in my search.

http://www.spektrumrc.com/Products/D...ProdId=SPM4210

Sent from my XT1080 using Tapatalk

Re: New 4 channel Spektrum, Dx4c
 

Was wondering when the 3C was going to get a facelift.

Re: New 4 channel Spektrum, Dx4c
 

the way I read it, that radio isnt a true 4 independent channel remote. I think it uses channel 3 and 4 for the AVC system. Not sure if you can separate and use those channels like a 2 or 3 position switch.....sure would be nice.

Re: New 4 channel Spektrum, Dx4c
 

I believe it is actually 4 channel, but if using the AVC which controls the throttle and steering to make jumps and turns easier you lose the 3rd and 4th channels. In "'normal' mode you have 4 channels available so you could run winches, lights etc.

The AVC IS just a stability system so anyone can drive a car, truck, whatever fast and less likely to crash.

I was pleased to see suggested retail price of $139 .

Sent from my XT1080 using Tapatalk

Re: New 4 channel Spektrum, Dx4c
 

Wow that's cheap. I want one!

I love my DX3S, but I hate that the spring constantly breaks.

Re: New 4 channel Spektrum, Dx4c
 

I just read Spektrum's website again today. This radio will function with four dedicated channels ! I quote:

"When the AVC system is not in use, the SRS4210 will function as a standard 4-channel receiver with any DSMR or DSM2® transmitter, allowing you to use the two extra channels for things like lights or gear shifting."

Re: New 4 channel Spektrum, Dx4c
 

Re: New 4 channel Spektrum, Dx4c
 

Too bad they didn't add a backlit screen into it. That would have made me swap out for my 3c for sure.

But then it would be a dx4s and cost more?

Re: New 4 channel Spektrum, Dx4c
 

so glad i didnt by the dx3c last week from my lhs!

Re: New 4 channel Spektrum, Dx4c
 

Is any one using this radio on there moa? I just picked one up and looking for a good setup to utilize the mixes

Re: New 4 channel Spektrum, Dx4c
 

K so I returned my 4c for the 4s because it has the moa mixing , after I updated the firmware and got a chance to play around I'm digging it , I set the thumb switch to control my dig , it is smooth and flawless , its forward for the front motors , and back for the rears, no cycling through to get what you want. I believe I can set the dial to control the proportional for the rear. This radio is gonna rock

Re: New 4 channel Spektrum, Dx4c
 

Got DX4C Friday - can set it up for dual winches on 3 position (x2 heyok 3 position winch controlers ) winch 1: trim tab A / winch 2: trim tab D ...... or like my class 3 , winch control on A: trim , and 4WS on/off on D: trim ( or you can have 4WS standard / Crab switching on tab)

still haven't figured out how to: 4WS standard / off nutral / Crab for rear axle

hope this make a little sense, this is my first programable radio

Re: New 4 channel Spektrum, Dx4c
 

Pat... you have your 4c set up to select 4ws /front wheel steer and crab? I could only get it to 4ws full time or switch to crab. I was told by horizon hobby I need the 4s to be able to have 3 or 4 steering selections. Front/4ws/crab/rear only steer.

If you figure this out please let me know how you do it. Or else im going to return it for the 4s

Re: New 4 channel Spektrum, Dx4c
 

have been able to set up standard 4WS / switch / front wheel steer only (have not been able to get all 3 to work but am working on it)

by setting mix to

0% - 0%
100% - 100%

this may be switched

Re: New 4 channel Spektrum, Dx4c
 

Okay that makes sense now. That what I can do as well, im told the 4c dose not have the programming to do anything mor. Must upgrade to the 4s or 4r.

Re: New 4 channel Spektrum, Dx4c
 

Is this one going to glitch like other spektrum systems? I'm just curious because from reading, many people have had range and glitching issues..still a lot of money to put out there and not know if it would glitch or not. I'll just stay with my Futaba:)

Re: New 4 channel Spektrum, Dx4c
 

No glitching that I have noticed

Re: New 4 channel Spektrum, Dx4c
 

have done these seperate setups:

3 position winch (Heyok 3pos controler) , and 3 position rear stear full 4WS/nutral/full Crab

3 position winch (Heyok 3pos controler) , and linier 4WS with nutral

3 position winch (Heyok 3pos controler) , and linier Crab with nutral

3 position winch (Heyok 3pos controler) , linier 4WS/NO nutral/ linier Crab

X2 3 position winches using x2 Heyok 3pos controlers