|
| LinkBack | Thread Tools | Display Modes |
03-12-2015, 06:12 PM | #1 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| HH Crawlmaster/BRXL Slow Speed
I just wired up my brand new crawlmaster and Brxl. It's geared at 56/13. Went to test it out for the first time and it ran fine until it went to crawl up a small rock. It would just quit then roll back down the hill. It runs fine at fast speeds but slow speed crawling is a no go for some reason. Anybody have any ideas? Maybe I have something calibrated wrong? Thanks!
|
Sponsored Links | |
03-12-2015, 06:30 PM | #2 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
Just a side note too, but it's the stock remote too.
|
03-12-2015, 10:55 PM | #3 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed
Gearing is a little tall.. 56/11 is a 5.09:1 gear ratio.. But that shouldn't brown out ur esc.. What battery are you using? |
03-12-2015, 11:01 PM | #4 |
Rock Crawler Join Date: May 2009 Location: Hillsboro, OR / Kapolei, Hi
Posts: 695
| Re: HH Crawlmaster/BRXL Slow Speed
Check motor timing. Re-cal the esc. Check batt voltage. What are your motor and esc temps?
|
03-13-2015, 08:54 AM | #5 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
5000 NimH battery. I'll try to recalibrate the Brxl when I get to our condo. On the way to Florida right now! Do HH motors come broke in or do I have to break it in?
|
03-13-2015, 08:56 AM | #6 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed
Yep.. I thought maybe so.. Sounded like NiMH.. Probably might want to get some lipo's. Anther guy on here, was having similar troubles. He went to lipo and they all went away. Are you running a bec? |
03-13-2015, 09:02 AM | #7 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
No bec yet. Forgive my lack of knowledge, still a new guy. What exactly does a bec do?
|
03-13-2015, 09:04 AM | #8 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed
All good.. Bec, battery eliminator circuit. (Or something close to that) ;) It separates the servo power from the esc power. That way, the servo isn't taking power away from your esc/motor. It will stop issues like the one you having. |
03-13-2015, 09:07 AM | #9 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
Sounds like a necessity. I found a hobby shop where we are vacationing. I'll see if I can find a bigger spur gear and maybe a bec and a lipo or two. I'll probably let them check it out too. Thanks and I'll check back in when it's all fixed!
|
03-13-2015, 11:14 AM | #10 |
Rock Stacker Join Date: Dec 2014 Location: South of columbus Indiana
Posts: 62
| Re: HH Crawlmaster/BRXL Slow Speed
Also buy the castle creations castle link for programming. You will need it for programming your BEC and ESC.
|
03-13-2015, 11:18 AM | #11 | |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed Quote:
I haven't found a a need for a bigger spur.. It gets into stuff: tranny cover, drive shaft, and output. | |
03-13-2015, 12:35 PM | #12 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
Just got the esc calibrated again. It seems to be running fine now. But I would agree the gearing is a little steep. I'll have to get to the hobby shop down here and get some gears.
|
03-13-2015, 06:29 PM | #13 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
What's a good ratio to run for mostly trail running/ crawling? I can seem to get a clear answer. Guys are saying they've smoked their motors on what looks like many different ratios. Just want a clear idea of a good ratio.
|
03-13-2015, 06:48 PM | #14 |
I wanna be Dave Join Date: Feb 2013 Location: NW Indiana
Posts: 3,196
| Re: HH Crawlmaster/BRXL Slow Speed
You will be fine with a 5.60:1 ratio....if you are running a 56t spur..just get a 10t pinion...i run anywhere from a 9t to a 11t pinion with no issues at all....
|
03-13-2015, 06:57 PM | #15 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed
I run from 10t to 12t.. Lol.. Now mine are 13t crawlmasters on 3s. What turn crawlmaster do you have? I use to run a 16t crawlmaster pro on 4s in my 8.5lb scaler.. Gearing was 87/16..(which is 5.4:1 gear ratio) Never had a issue. |
03-13-2015, 07:30 PM | #16 |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed
My crawlmaster is a 13t.
|
03-13-2015, 07:55 PM | #17 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: HH Crawlmaster/BRXL Slow Speed |
03-14-2015, 03:36 AM | #18 | |
Rock Stacker Join Date: Jan 2012 Location: Vancouver
Posts: 68
| Re: HH Crawlmaster/BRXL Slow Speed Quote:
@Indianafarmer, here's a thread I started that I was just able to resolve with the collective awesome help of the amazingly awesome people here that are of awesome awesomness. You may find something in it worthwhile, if for nothing else to know you are not alone. Holmes Hobbies BRXL ESC. Trash It or Repair? | |
03-14-2015, 06:07 AM | #19 |
Quarry Creeper Join Date: May 2013 Location: Knoxville
Posts: 466
| Re: HH Crawlmaster/BRXL Slow Speed
What servo are you running? A servo that is going out can cause all kinds of problems. If it keeps giving you problems try un plugging the servo and slow crawling. If the problem goes away it's your a servo problem.
|
03-14-2015, 07:36 AM | #20 | |
Rock Stacker Join Date: Feb 2015 Location: Lafayette
Posts: 61
| Re: HH Crawlmaster/BRXL Slow Speed Quote:
| |
HH Crawlmaster/BRXL Slow Speed - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Good crawling and OK speed: Holmes Crawlmaster 13t and Holmes BRXL | chefclancy | Axial Wraith | 7 | 07-23-2013 10:48 AM |
| |