Latest version of Castle Link???

[gdb85]

Has anybody had trouble with there ESC's that have updated their CL? The reason I ask is I purchased 2 BLE's and a BRXL just recently and the Castle Link would not permit me to program the HH BLE's without an update. No problem, I did the update and proceeded to set up all 3 ESC's to my liking. Pretty much standard stuff really no custom settings.

I got everything installed and binded properly. All 3 rigs have the same issue, after 1/4 throttle they jump up in RPM's at will. The BRXL is connected to a HH 13t CrawlMaster and the BLE's are hooked up to sensored BL motors a 17.5 Redline and a 1850 Pro HD. Let me ad this only happens going forward, the reverse throttle input is smooth through out.

The first thing I thought was the TX has a bad spot on the fwd throttle but they are on 2 different TX's (both DX3r) Let me add that there are other rigs on the same TX's, a couple BRXL's and MMP's that do not have the latest version of Castle link.

Any help or suggestions would be greatly appreciated.

[Jeckler]

Castle Link is the PC software used to program the ESC or BEC that's in the vehicle. It sounds more like you're having an issue with firmware.

[Joshwaa]

I have the HH BLE with a ROC 412 and no troubles with the castle link or the throttle control. I am so glad I went with the HH BLE. I am running the latest castle link software also.