09-02-2016, 09:06 AM | #1 |
Newbie Join Date: Aug 2016 Location: Chelsea
Posts: 41
| BEC and SRS4210
I'm setting up a Pro Comp Crawler. I want to use an SRS4210 rx with 2 esc, 1 servo and a BEC. I will disable the AVC. The manual says to plug the power into the BIND/BATTERY port. If I do that, how do I bind the receiver? Without the battery the rx is not powered up. I've been unable to get through with Horizon Hobby for an answer. I have removed the red wires from the 2 esc's. Any help would be appreciated. |
Sponsored Links | |
09-02-2016, 09:16 AM | #2 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: BEC and SRS4210
Bind the reciver 1st, them do the other steps. It should stay bound for a long time. You can use the bec to power your rx but be careful not to over power it. Meaning if you set bec at 7.4v for the Servo the reciver will also get 7.4v. So check you recover voltage capabilities. 149 r/c worx team driver |
09-02-2016, 12:22 PM | #3 |
RCC Addict Join Date: Aug 2009 Location: Earth?
Posts: 1,698
| Re: BEC and SRS4210
You also plug the BEC in one of the AUX while binding. Then switch it back after binding.
|
09-02-2016, 12:45 PM | #4 |
Newbie Join Date: Aug 2016 Location: Chelsea
Posts: 41
| Re: BEC and SRS4210
Thanks for the help. Sent from my SM-G900V using Tapatalk |
09-02-2016, 12:51 PM | #5 |
Quarry Creeper Join Date: Aug 2015 Location: canton,oh
Posts: 275
| Re: BEC and SRS4210
dont forget to pull the red wire from esc plug when powering rx from bec |
09-02-2016, 01:13 PM | #6 |
I wanna be Dave Join Date: Jan 2006 Location: Corruptifornia
Posts: 12,107
| Re: BEC and SRS4210
RX BYPASS ADAPTER $6.00 Product SKU: 250100008 Add some BEC power to your servo without routing through the RX RX Bypass Adapter - Wiring & Wiring Accessories - Electronics & Wiring |
Tags |
srs4210 |
BEC and SRS4210 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SRS4210 w/AVC or SR3100? | cmbscx10 | Axial Yeti XL | 3 | 03-18-2015 07:31 AM |
| |