Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Ya, something isn't quite adding up here - program card and folder, and 'brushless'? Uh, no. |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC As I recall, both of my 1080s came with a separate instruction page just for the programming card. Following the directions on this page did not work. Just plug it in as stated above and it should work fine. |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
It seems that this doesnt work for crap if you are plugging it into the reciever instead of the fan port :oops: R |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
|
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Ah yes, the port on the top of the esc - it couldn't be easier. :) Just check for proper poles - match up your ground/black wires. Plug in, turn on esc, card lights up. Power down, remove it, re-power and new settings are programmed. I run full low acceleration and braking to smooth out control for crawling. My buddy's rigs will do wheelies and stoppies with the trigger - I can do without that. LOL And 25-50% reverse for 3s. I don't need it to go 10mph in reverse. I run larger pinions too, for a little extra speed. If you're not careful you'll break stuff. 15-16T |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
Sent from my SM-G960W using Tapatalk |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
Just an FYI |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Looks like the price dropped from $41 to $33? Ordered 2 more for micro builds. Sent from my VS987 using Tapatalk |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC What's the voltage for medium and high cut off settings? |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
Im running 3S Ace Adventure shorty pack , Holmes Trailmaster Sport 540 35t ...its way too fast without the 2 speed... |
Re: Hobbywing Quicrun Waterproof 1080 Brushed Crawling ESC Quote:
Interesting. I have everything the same except for a HH Crawlmaster 550 12T and it’s buttery smooth. No wheelies at all. Mine was a bit hard on the brakes at first and I had to dial it back with the programming card a bit. |
All times are GMT -6. The time now is 02:08 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com