Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Shocks, Machined Ring Gear, Locker |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades MyTrickRC announced a light kit for the Sendero body. Added them to the Upgrade Vendor List: http://www.rccrawler.com/forum/eleme...ml#post5973807 Their light kits give a lot of light! Their announcement on their Facebook page with a video: https://www.facebook.com/MyTrickRC/v...8862682608511/ |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Nice decal kit from SOR RC Products: https://www.shopsorgraphics.com/coll...im-decal-sheet https://cdn.shopify.com/s/files/1/00...g?v=1575439476 |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades That decal set makes the stock Enduro Sendero body look so much nicer! I always liked the shape of the body, but the paint scheme leaves much to be desired. Unfortunately, those decals would get ripped up like no tomorrow where I run at CDM. |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Yep, very nice decal set indeed, it was fyi already in the Element RC Enduro Upgrades Vendor List topic http://www.rccrawler.com/forum/eleme...ndor-list.html I ordered three of them a couple of months ago for my Enduro Sendero and for the Enduros Senderos of some friends. They are very durable and a good quality. Comparable with Freqeskinz. Just take your time applying, use a hairdryer as the decals are quite thick durable material. Good print quality too. Colors are matt. Also, it makes a huge difference to the thin body, as the body now gets thicker. It sure helps with not ripping the body, espacially the bed part. Here is my version. A body color in green, black or white sure makes the decals stand out even more. I went for a matt white cab and matt white/black bed body color. (Axial SCX10 II Blazer font and rear bumpers, tucked in, a Cesco RC Twin Roll Bar v1 and Cesco RC Body Clamp V2). https://www.rccrawlerscalergroep.nl/...le.php?id=7496 Since this photo is taken. I now also have a set of DJX green with black color beadlocks. The green matches the green of the decal. Makes it pop even more. http://www.djxmodel.com/index.php?c=product&id=143 https://www.aliexpress.com/item/3295...27424c4dl8LgLf http://www.djxmodel.com/uploads/2019...1651201456.jpg |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
I am not really a vendor myself. |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Thank you soze. |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Is there anyone that have found a way to narrow down the original axles? Making them more scale looking for some bodies. |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades As I wait for my Element to arrive I have been browsing and shopping around at all the upgrade parts listed. I noticed that the front shock hoops made by Hot Racing are 1 pc with the pan hard bar mount while the Samix is 2 pc. Is one better than the other and is Hot Racing good stuff? Pardon my lack of knowledge on brands as Im a 100% greenhorn, Thanks! |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades I have the Samix with no regrets. I started with the hard part that still had some flex but the Samix piece is very solid. |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Zoskay 35kg DS3235 servo installed. Works pretty good for under $40. Made a video to show how it works compared to the stock Reedy servo. https://youtu.be/TSrc_wIiQMo |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades I just posted up a shock tower brace on Thingiverse that I pulled from a body mount design. Requires two 20mm M3 screws to mount, use the other hole not used for the shock. https://www.thingiverse.com/thing:4490390 https://i.imgur.com/km8p2Hyl.jpg |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Quote:
|
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Good stuff in here! Senduro might be my next buggy... Lou |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Nice! But... Why arent you at your post?? ;-):ror: |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Not sure if this was noticed before - From Element, a 3D-printed engine cover to fit in between the front shock towers - also a radiator - follow the link to the pdf file, and at the bottom of the page there are hyperlinks for free files to print yourself as well as links to the Shapeways store to buy the engine cover and radiator already printed: From their site: • Designed to be modular so that it can be customized. • Engine is symmetric with both left and right halves of the motor. • Servo winch can be used with no modification. • The engine cover is designed to work with solid axle trucks. • Components are designed to be lightweight so that it does not negatively affect the chassis CG. https://img2.associatedelectrics.com...gine-Parts.pdf https://images3.sw-cdn.net/product/p...697111_1_0.jpg |
Re: New Associated Enduro Crawler - Free-Mods & Upgrades Yeah racing also makes aftermarket upgrade parts, haven't found them in the first post https://www.yeahracing.com/index.php...scription=true |
All times are GMT -6. The time now is 07:30 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com