RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   EnRoute Berg (http://www.rccrawler.com/forum/enroute-berg/)
-   -   My Dig Switch Box! (http://www.rccrawler.com/forum/enroute-berg/136425-my-dig-switch-box.html)

Harvo 12-26-2009 06:53 PM

Quote:

Originally Posted by Tklan Crawler (Post 2186355)
but on my losi moa it has to go same direction,sorry i didnt mention this.

So is the question for a Losi of for a Berg? After thinking about it, the same principal applies unless the losi axle have the gears running the other way. In R/C, most front and rear axles are identical from the knuckles in.... just backwards.

racerx26 02-28-2010 02:50 PM

How much did this cost you in total?

ryandeputy 03-15-2010 04:28 PM

well thats pretty badass..... "thumbsup" super clean

badeddie 03-24-2010 02:00 PM

im going to have to try this. alot of good info on hoe to do this,thanks

Abavuso 04-27-2010 06:45 AM

that answers my question about how to do a dig for the berg.

DOUBLE ARA 05-04-2010 12:25 PM

very nice work I like the box it 's very clean"thumbsup"

auscreep 05-05-2010 01:23 AM

what a great thread thanks"thumbsup"

jr104 05-22-2010 03:47 AM

I just finished mine. Works very well. Great thread"thumbsup" Thanks!!!!

Jake

bschimmel 05-25-2010 12:24 AM

Dig
 
Thats a great job, but the box does take up too much space. The Vanquish Dig is easy to install and works flawlessly. But nevertheless, great job!!!

SaxtonSlaughter 05-25-2010 12:49 AM

Look again
 
1 Attachment(s)
Quote:

Originally Posted by toy4crawlin (Post 1949051)
THAT is NOT a pic of a dig . It's a pic of a crawler

Better look again! The receiver is also built into the dig box:flipoff: Attachment 136335

crashmurray 05-27-2010 06:47 PM

dig
 
thanks for the thread! I built mine yesterday and got it in, I made the box for mine a lot smaller though, great thread! thanks again!"thumbsup"

crawler_jake 07-31-2010 11:47 PM

nice nice

rockn 08-11-2010 11:36 PM

:shock:WOW, Thats cool8). I work for a electronics company I'm going to build 1 of theses. "thumbsup"

MRCCRAWLER1.9 08-24-2010 06:00 PM

Hey does this work with a 3-Channel??? just wondering kinda a noob with the channel setups..

Also, what do you mean by switch the motors??

on the berg 2.2.. the motors are on the same side, so your saying, that if i wire it properlly (shown in your thread), one of my motors will run the correct way and the other will run in "reverse"?

Jeepkid 10-09-2010 10:01 AM

Does the dig switch box lock the axles up when engaged?

Bigend777str 10-11-2010 12:04 AM

guys with these setups. Please post more pics so I can steal your ideas please. :ror:

Jared

MRCCRAWLER1.9 10-11-2010 12:07 AM

Quote:

Originally Posted by Jeepkid (Post 2678101)
Does the dig switch box lock the axles up when engaged?

it doesnt lock up the axles, more like just shut off the motor and stall it momentarily

Jeepkid 10-11-2010 03:12 PM

Quote:

Originally Posted by MRCCRAWLER1.9 (Post 2680651)
it doesnt lock up the axles, more like just shut off the motor and stall it momentarily

So its a freewheeler switch not dig.:lmao:Just kidding, I got my answer from The Violator. Thanks for the reply though.

Steve'O 10-11-2010 11:54 PM

i made for mine than switched to the punk dig but mine worked good nice nice"thumbsup"

Jeepkid 10-12-2010 04:47 PM

Quote:

Originally Posted by Steve'O (Post 2682465)
i made for mine than switched to the punk dig but mine worked good nice nice"thumbsup"

Thats good to hear, Imay just make one for the same reason they make a feathered toilet seat( for shits and gigs):lmao:I want a punk dig, but if I can make it for half the price or less. I will.


All times are GMT -6. The time now is 09:47 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com