09-03-2009, 10:26 AM | #1 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
| TC's New Fubar Skooter
I had been running my AKRCC Deimos chassis for awhile and thought it was setup very well(at least for around my area). Then we took a family trip to CO. for the Vanquish LaGuerra en Rocas Rojo event.. Although I did not care where I placed, nor did I take any driving serious(family vacation), I quickly found out that my truck was far from what I wanted and it absolutely sucked. So as soon as I got back in town, I tore it apart and made a few phone calls.. So as any build goes, you definitely have to give props and thanks to those that made it possible. TheCrawlerStore - www.TCScrawlers.com Team RCC - http://www.rccrawler.com/teamrcc.htm Fubar Crawlers - http://fubarcrawlers.com/ Team Tekin - http://teamtekin.com/pm_rockcrawling.html WheelWorks - 2.2 1911's TriState Graffix - http://tristategraffix.110mb.com/ Tag Line - http://www.rccrawler.com/forum/members/the-eye-14256.htm Specs: Berg axles Fubar rear axle lockouts Fubar Skooter Chassis Tag Line delrin bent lower links w/ Revo ends Traxxas 5319 upper links(rear) Custom upper front links Custom Battery/Servo tray Custom steering setup. Also steering holes drill 1/4" back Tekin FXR Tekin 55t Handwound motors Wheel Works 1911 beadlocks HB Rovers Airtronics 94359 Servo Castle BEC Spektrum DX3 - resoldered wires to change 3pos. switch around Rat shack dig - I have only ever burned up 1 switch in 3 yrs. So no reason to fix what ain't broke! Losi Grappler TriState Graffix did all the paint masks to make painting so much easier Axial Shocks that I won at the Vanquish event. Thanks also goes to Brad "Hollywood Bender" Dumont for the help on setting these up..By far, the best damn shock on the market that I had used Since building the truck, I haven't had much wheel time with it. But all I can say is, DAMN! This Skooter chassis works very well and is very predictable.. Enough rambling and on to the pics |
Sponsored Links | |
09-03-2009, 11:43 AM | #2 |
I wanna be Dave Join Date: Feb 2005 Location: Burnsville
Posts: 3,096
|
So shinny and new. I would hate to scratch that up. Do those shock standoffs (top and bottom) come with the shocks? |
09-03-2009, 11:47 AM | #3 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
|
Yeah, the 1st scratch always hurts No. The uppers come with the chassis and the lowers are ones I had laying around. |
09-04-2009, 06:47 AM | #4 |
I wanna be Dave Join Date: Jul 2006 Location: Elberfeld
Posts: 2,085
|
Looks good!
|
09-04-2009, 08:26 AM | #5 |
Quarry Creeper Join Date: Feb 2009 Location: In The BackYard Crawlin
Posts: 278
|
That is a sweet rig.What is the width of your chassis?
|
09-04-2009, 08:42 AM | #6 |
I wanna be Dave Join Date: Mar 2008 Location: Pacific Ocean
Posts: 2,342
|
Lookinn great. I'm getting ready to put one of these together myself. CAn you tell me the eye 2 eye on the lower links? Thanks |
09-04-2009, 09:32 AM | #7 |
RCC Addict Join Date: Nov 2007 Location: E.T.R.C.
Posts: 1,575
|
Looks good Jeremy Love the chassis....Whats up with the phillips hardware on the uppers Oh yea you forgot some of the bolts in your wheels |
09-04-2009, 09:42 AM | #8 | ||
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
| Width is 2" outside of plates Quote:
Quote:
Thanks guys..John did a great job with this chassis | ||
09-04-2009, 09:45 AM | #9 |
WWW.THEROXBOX.COM Join Date: Sep 2007 Location: The Legend of Stone Pillow
Posts: 1,404
|
Now that is one good looking rig ... It is so clean on the inside and the out side, it all just fits so well in the chassis. I cant wait to watch it kick my a$$ at the next. Nice job Bro |
09-04-2009, 06:30 PM | #10 |
RCC Addict Join Date: Mar 2009 Location: In a very dark cave can't you tell...
Posts: 1,708
| Skooter
Thats a serious looking rig and a great paint job on it. |
09-04-2009, 06:53 PM | #11 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
|
Holy shit dude. Stepped it up. |
09-04-2009, 07:01 PM | #12 |
Ultimate RC Decals Join Date: Aug 2005 Location: San Antonio
Posts: 3,761
|
damn man i'm diggin that chassis!!! |
09-04-2009, 07:07 PM | #13 |
DOOH!!! Join Date: Feb 2007 Location: AZ
Posts: 2,105
|
Looks GREAT TC!! Might have to try some of those lower links, just not comfortable with the bent Delrin rods i made.. Lovin the paint too, looks familiar though.. |
09-04-2009, 07:13 PM | #14 |
I wanna be Dave Join Date: Dec 2005 Location: Happiness is a warm AK.
Posts: 12,563
|
Is it fun to drive?
|
09-04-2009, 07:18 PM | #15 |
MODERATOR™ Join Date: Jul 2004 Location: Ohio
Posts: 18,928
| |
09-04-2009, 07:43 PM | #16 |
I wanna be Dave Join Date: Jul 2006 Location: Elberfeld
Posts: 2,085
| |
09-04-2009, 08:29 PM | #17 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
|
Thanks guys, appreciate the words The TriState Graffix masks, made it easier to paint. If not, I would be sitting here still trying to cut out paint masks Best rattle can job I have done to this day IMO. Rally Green, Outlaw Black and the SpazStick Ultimate Chrome yes I know John, it does look vaguely familiar I just didn't have the funds to send my body off to Brian and get sprayed Dez, hell yes it is. It does things that my last truck had trouble with Tim, you can have fun beating the truck at any comp, as long as you have fun |
09-05-2009, 03:46 AM | #18 |
Rock Crawler Join Date: Apr 2009 Location: Arizona
Posts: 745
| |
09-05-2009, 07:56 AM | #19 |
Colt Python/SR9c Join Date: Feb 2004 Location: out in the shop, reloading ammo!
Posts: 8,626
| Yep, its was the body that you painted for John, found here http://www.rccrawler.com/forum/showt...light=grappler that mine was based from. You said you could paint me one up also, but I told you I would make a few changes, in which I did. So as I said in the PM, sorry that I didn't have the money to send to you, to paint the same thing
|
09-05-2009, 08:05 PM | #20 |
TEAM MODERATOR Join Date: May 2004 Location: Tennessee
Posts: 10,855
|
Looking pretty snazzy Looks like your link geometry and shock angles are real close to what I've been running. Should be a good performer.....I think you can beat Tim with this one. Bout time to step it up eh Tim. |
| |