New hall Style chassis+ 300 HDS
 

I had one of the original Hall Style Chassis(sold here DLUX FAB | Products ) and wanted to update it, Here is the New chassis. I also Got a set of Super 300HDs from John (SDS Customz http://www.rccrawler.com/forum/gener...00-300hds.html ). In order to run the 300 HDs I had to order a custom set of tubes from Eric at Dlux fab to fit the raith chubs. I also used raith knuckles, both chubs and knuckles are from Vanquish Products(axial wraith exo ax10 xr10 honcho crawler wheels titanium accesories, beadlock wheels ). I used Tomi's knuckle weight system.

So now I have a Berg that turns as good or better than my Xr ever did, and a chassis that is super stable and climbs like nothing else I have driven. "thumbsup"

Re: New hall Style chassis+ 300 HDS
 

Looking good man!

Do you have a shot straight on with steering at full lock (not from above)?

Re: New hall Style chassis+ 300 HDS
 

Here ya go"thumbsup"

Re: New hall Style chassis+ 300 HDS
 

Yeah, thats quite a bit of steering.

Lots of caster too. Thanks for the pics, I wanted to see what effects that much caster with 8* stuff had on the axle. Its almost like its back to the NON 8* stuff which is interesting....

Re: New hall Style chassis+ 300 HDS
 

looks gd but why didnt u post ur rig in the berg section u silly sally

Re: New hall Style chassis+ 300 HDS
 

Ya silly sally i found this through a diff thread. So u can only get as much steering as the shocks will alow .is that correct

Re: New hall Style chassis+ 300 HDS
 

The shocks are not the reason. The links are the reason I cant get any more steering. I have them shimmed in and the links are touching the motor on one side and is even on the case side.

Re: New hall Style chassis+ 300 HDS
 

So with all this new found steering i bet ur still going to. take the revo

Re: New hall Style chassis+ 300 HDS
 

Wraith*

Re: New hall Style chassis+ 300 HDS
 

OK so Im not the best at spelling:flipoff:

Re: New hall Style chassis+ 300 HDS
 

what size big bores are good with the new hall chassis and berg axles"thumbsup"

Re: New hall Style chassis+ 300 HDS
 

4", which end up measuring 4.125" after cap mod.

Re: New hall Style chassis+ 300 HDS
 

Ya I use the 4 in. Shocks too.

Re: New hall Style chassis+ 300 HDS
 

A 4" shock will be easiest but you can use anything from a 3.5" with long rod ends to the 4" with smaller rod ends. You will probably want to limit the shocks with the 3.75 or 4"' shocks though.

Re: New hall Style chassis+ 300 HDS
 

thanks"thumbsup"

Re: New hall Style chassis+ 300 HDS
 

Looking good Josh.