Beerman's RcBros Berg build (update on page 7) 4 Attachment(s) It's time for a rebuild after seeing how sweet RcBro's new tubes are. I going to use every part that RcBro makes for the berg. As of right now I have his tubes, link mounts, and knuckle weight holders (still waiting for the brass weight). I was able to make a trade with a guy from my club (ORCRC) and was able to pick up a secret agent chassis that I really look forward to running. I have been running BJ 4.2 for a couple years now and was very happy with it. I'm hoping to have my berg up and running over the next week or two. I have to say thank you to my buddy sourdojack for all his help with my truck. I don't think I could do this hobby without him. When I say I built this I'm really saying Tom built this :) So as of today I have the chassis put together with the shocks I just picked up. I have all the RcBro parts ready to be bolted up. Attachment 243507 Attachment 243508 Attachment 243509 Attachment 243510 Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Looking great buddy! Thanks for the props! Can't wait till we get this truck all built up for ya! TOM |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Looks good! Shiny "thumbsup" |
Quote:
Sent from my iPhone using Tapatalk 2 |
1 Attachment(s) The controller I'll be using is a Futaba 4 PL. I was able to get some skins for it from RcBro. The skins came from freqeskinz, they look great Attachment 243572 Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Quote:
Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
2 Attachment(s) The motors I will be running are some 16T Holmes hobbies crawlmasters. I have been using these motors for a long time and I love them. They are super smooth and have plenty of power. Tom just lathe the comm's and put in new brushes so these motors are ready to rock and roll. Attachment 243577Attachment 243578 Now I want to get my hands on some of those new 500 puller motors and speed controllers. Sent from my iPhone using Tapatalk 2 |
2 Attachment(s) Quote:
Attachment 243579 Attachment 243580 Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Can't go wrong with those. My #2 berg has an og set that was among the first batch made. Hand delivered to the 1st Floodapalooza comp. Anyways I'll stop cluttering your thread:ror:. You have a good mechanic so things should go great"thumbsup" |
Quote:
Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis nice |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Today im getting some work done on my gear boxes so Im hoping to post up some pictuers late tonight. |
5 Attachment(s) Got some work done on my gear boxes. I put it on a bench grinder to get the rough shape. After that took the dermal to smooth it out then polish it up on a polishing wheel on the bench grinder. Creation Fab milled the motor mount flat, thanks Chris. Tom made the carbon fiber gear cover. So after a few hours of work I think they turned out great. Attachment 243765 Attachment 243766 Attachment 243767 Attachment 243768 Attachment 243769 Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis that's not fair I want sourdough cf gear covers:flipoff: |
Quote:
Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Quote:
Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
Parts are looking great. Should be a fine performing rig. J |
Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis They were easy to polish. The only problem is the first scratch kinda hurts. |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Looking good! Wish I had the patience to polish haha.. Working on your C's. Sorry for the delay! |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
I polished my c hubs and knuckles so the shine will last. I also polished my upper links since they don't really get scratched up |
Quote:
Sent from my iPhone using Tapatalk 2 |
Beerman's Berg: RcBro/ Secret Agent Chassis 2 Attachment(s) I have some gold dot VooDoo's mounted up on some SLW V4. I'm using the 6 inch close cell with the soft outers. Tom comp cut the front on a bench grinder that work really good. I will also be trying the medium outers on the front. Attachment 243876 Attachment 243877 Sent from my iPhone using Tapatalk 2 |
2 Attachment(s) Picked up a light weight TI rear axle from CREEPERBOB. I have to say he did a great job on these, they look great. Attachment 243879 Attachment 243880 Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Pin pattern in your plans? Should get you some Black Ice for those VP's! |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis I am trying some black ice beadlocks out right now with my SLW's and I am liking them a lot so far."thumbsup" http://i954.photobucket.com/albums/a...ps412a75d4.jpg |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
|
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Finished yet? |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Quote:
I’m going to have it finished this coming up week. Just the other day I got all the parts i need so next week is build week. I just order up some of RcBro's gears so I can’t wait to get them. I’m really thinking about getting some of Dlux shafts, the only thing holding me back is buying some wraith knuckles and C's. I’m going to wait until i have the truck built and see how much more turning I can get with my setup. |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis I tell you what guys.. It sure pays to be local to RcBros! Got this new sweetness today after work. Don't tell Jaybe yet cause he's still at work! Out with the old http://i55.photobucket.com/albums/g1...ps8fc31828.jpg In with the NEW! http://i55.photobucket.com/albums/g1...ps1d0cc1fd.jpg These gears are SOOOO nice! Great job Will, you have done us all proud! They are definitely worth the time, effort and money you have into them! TOM |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Thank God I have a computer at work. I cant wait to see the gears, they have to be bad ass. Did you pick up the steerting arms from Will? Tom i talk to VP today and they will be getting the knuckles and C's in tomorrow and they should be shiping soon after that. It should be crawling soon :mrgreen: |
It's update time. I finally made progress getting this built. I have the RcBro tubes on along with his knuckle weights and new gears. I still need to make some upper links and I will make them out of carbon fiber tube. So far I'm happy with the way the look and feel of the truck. Here and some pictures. http://img.tapatalk.com/d/13/07/24/8ara9uba.jpg http://img.tapatalk.com/d/13/07/24/zanu2ubu.jpg Sent from my iPhone using Tapatalk 2 |
Re: Beerman's Berg: RcBro/ Secret Agent Chassis Nice! Love the stance in the first pic"thumbsup" |
All times are GMT -6. The time now is 04:22 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com