|
| LinkBack | Thread Tools | Display Modes |
01-22-2016, 07:34 PM | #1 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Berg Built By BarryBelvedere?
Last summer I built a 2.2 pro Rig for a buddy named Ed G. I did take some pics while building it but did not have the time for an actual build thread. It is more of an eye candy thread than anything. Some pics are randomly thrown in out of order. I tried the best I could with the time I am allowing for this. This rig was not built to break any weight records but still ended up being a very light rig. Can't remember what I got it to weigh but it was alot lighter than my XR-10. Parts list....... Barry's R/C Carbon AMX Chassis ClassiCutCustom axle housings Rc4wd gears Dlux axleshafts Vanquish knuckles Krazed Builds Snowflake wheels, elec tray Rcbro's knucle weights Voodoo's Silver C.I Foams Hitec 7050th X2 Castle micro mamba Castle BEC Started with scx10 shocks switched to big bores at last minute. Barry's R/C Carbon Titanium links & Motor guards Holmes Hobbies Custom puller pro 500 motors Last edited by barrybelvedere; 01-22-2016 at 08:12 PM. |
Sponsored Links | |
01-22-2016, 07:39 PM | #2 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
So its more of a Built thread. so for the pics.... silver Voodoo tires, Vanquish hubs in the front Lattice hubs in the rear, Krazed Builds snowflake wheels. Crawler Innovations Foams 6" soft front med in rear. Inner foams will be drilled out for venting. Last edited by barrybelvedere; 01-22-2016 at 07:43 PM. |
01-22-2016, 07:50 PM | #3 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Acquiring the parts needed to build a Berg is a job in its self! Not sure why the XR-10 parts are in the one pic...
|
01-22-2016, 07:54 PM | #4 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Notice the snowflakes got much BEEFIER!
Last edited by barrybelvedere; 01-22-2016 at 08:13 PM. |
01-22-2016, 08:04 PM | #5 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Starting to test fit all the Axle parts...Since it has Dlux axleshafts inside CCC axle housings I had to use the lathe to bore out the axle tubes. I would have liked to install inserts on the rear Delrin hubs. I just threaded them out. Plus a bit extra. Last edited by barrybelvedere; 01-28-2016 at 08:48 AM. |
01-22-2016, 08:09 PM | #6 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
I am Just knocking out these pics for you to see what type of awesome rigs can be built not bought. Its my first Berg so there was a few things I could of done to improve. Like better pics. All were done with my Iphone.
|
01-22-2016, 08:20 PM | #7 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Now for the AMX Chassis and Links. Aluminum screws can be tightened only so many times before the hex drive is compromised so I built it with silver hardware first then replaced them once it was assembled.
|
01-22-2016, 08:30 PM | #8 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Final assembly pics
Last edited by barrybelvedere; 01-22-2016 at 09:05 PM. |
01-22-2016, 08:33 PM | #9 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
more final assy. pics
|
01-27-2016, 11:07 AM | #10 |
Fifth dimension Join Date: Oct 2012 Location: Quakertown
Posts: 2,066
| Re: Berg Built By BarryBelvedere?
Nice build Barry! You are having a lot of success with your new chassis and I couldn't be happier for you bro. Keep on killing it. Hope to see you soon bro!
|
01-27-2016, 11:55 AM | #11 |
RCC Addict Join Date: Nov 2011 Location: the not so white north
Posts: 1,299
| Re: Berg Built By BarryBelvedere?
Lookin good there Barry! Looks like another killer rig on the rocks! Hopefully get to see you at RC Crawling Championships this year!
|
01-27-2016, 03:31 PM | #12 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
| Re: Berg Built By BarryBelvedere?
Look at him go!! Awsome truck and I really like your photo box! Excellent lighting! I like this one Last edited by Harvo; 01-27-2016 at 03:33 PM. |
01-27-2016, 09:21 PM | #13 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Thanks Mammoth, Harvo and Crawlife.
|
01-28-2016, 03:19 PM | #14 |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
| Re: Berg Built By BarryBelvedere? |
01-28-2016, 05:50 PM | #15 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Best small crawler packs available highest C rating also. Zoom in on batteries to see. Valuehobby.com like 8 bucks each. Every other time i was looking at them on their site they were out of stock. But check every couple of days and more will pop up. Beest found these.
|
01-28-2016, 06:11 PM | #16 |
owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down!
Posts: 20,290
| Re: Berg Built By BarryBelvedere?
Wow, sexy rig! I like the purple accents.
|
01-28-2016, 09:31 PM | #17 | |
I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind
Posts: 6,386
| Re: Berg Built By BarryBelvedere? Quote:
| |
01-28-2016, 11:23 PM | #18 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
Thanks you Mr. Holmes
|
01-29-2016, 08:51 AM | #19 |
RCC Addict Join Date: Jul 2009 Location: Near Boston
Posts: 1,233
| Re: Berg Built By BarryBelvedere?
Looks Awesome Man. Time to give it some scratches ;) How did the build Jig work for you, think this is the first photo I have seen of one? |
01-29-2016, 09:49 AM | #20 |
Quarry Creeper Join Date: Mar 2009 Location: Under a Rock
Posts: 457
| Re: Berg Built By BarryBelvedere?
The jig works great. I normally just use a tape measure seems to be quicker. Once the wheelbase is real close to 12.5" then I put the jig on to ensure it is not somehow getting too long thru the suspension cycle. It is also easier to tell how much/little the wheelbase grows than using a tape measure. The berg in this build was a customers rig. He lives in New York, Maybe we will see it in your neck of the woods.
Last edited by barrybelvedere; 01-29-2016 at 09:51 AM. |
| |