Project Crossroad Midnight Special Blingmobile First FOFF Build OK I've been itching to do this 1/10 scale FOFF build for a 2 or 3 week now but haven't had the courage do to it until now."Why". Still thinking of a frigging name...Any suggestions,and It's my first FOFF public build,so take it easy on me. I fine they look so damm cool i had to build one.I'm already gathering parts for a 1/8 scale version and i haven't even started this one yet.I thinks it's an addiction. Hopefully it's a straight forward build but I'm sure I'm bound to run in to a road block some where during the build but I'll fine a way to fab something up or what ever resources i have here. I think i have most of the parts that i need for now will see as the build go on.Also I've been doing my homework on this new form of RC fun and I can't wait,Now all i have to do is fines some sand.No Prob.. If this is new or old RC FOFF It's bound to grow.Hey doesn't Koysho make a RTR FOFF or was it HPI.Hmmmmm... Until i learn how to weld which I'm learning and use styrene I'd like to be good as the builds i see on this forum,hopefully i will reach up to that level,but for now I'm not bad but no expert,i have learn't a lot from this forum and seen of lot of out of this world builds, thanks for all the tips and tricks and how too Guys and gals if there are any gals out there,Any hoo great stuff keep up the good work. I don't want people to think that this has been done before,which probably has,Duh "Photo Gallery" but everyone is different and hopefully mine will be one of them and I hope you like it. "Critics,Info,and suggestion are always welcome" i could use all help i can get cause I'm going to need it. Also the things and product I'll be using may not be suitable to everyone,it will serve my purpose for what I'm working on. The product that i see used often can be expensive,and my wallet not thick so I'll be taking the cheap route,well not that cheap but a little cheaper then the other products So for all you fans Here we go........Oh ya by the time you read this I already have a name.I think I'm gonna call her "Crossroad Blingmobile Midnight-Special". I think it sues her"fine like cherry wine" Ya i know old school saying..... ENJOY AND CHEERS...or as my brother would say "Chin Chin"... Meaning have fun... |
Re: Project Cro$$road To Mid-Night $pecial First FOFF Build Well it was a late night last night writing up a sympathy letter for this bad boy...ya to funny:lmao:,It's a Do or die situation and i can't stop now. So without further a due this is what came in the mail a couple weeks ago. http://i1296.photobucket.com/albums/...psohmtpdpe.jpg |
Re: Project Cro$$road To Mid-Night $pecial First FOFF Build Catchy name amigo, sounds good. Mine in italian means- Ascent Unlimited-Salita illimitato.;-) I think FOFF has been around for 3-4 years now, maybe longer i'm not sure. I went to join a Foff forum, but i can't translate it so couldn't join, but there's a formula off-road page on FB- https://www.facebook.com/groups/100829206660003/ But again its mostly all in finnish so i recently left that group, i made an intro but no one replied and said anything, so i left, think i was the only australian lol ha ha. Oh Kyosho make the one your thinking about-Kyosho FO-XX http://www.towerhobbies.com/products.../kyoc1228.html Hey what's in the box..?:) |
Re: Project Cro$$road To Mid-Night $pecial First FOFF Build Quote:
Your name is cool but hard to pronounce sound like Satellite limitations :lmao: 3 or 4 years Wow so this Foff is like new.Cool! Oh OK so Kyosho FO-XX looks nice too bad it's nitro to much tuning for me. Strip the guts and viola an Foff... sounds like a plan i'll have investigate that more What in the box:Check the next page..... Q:Can i multi quote in this same quote...."thumbsup" |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Well here is the some of the bling i was talking about.hopefully everything goes the way it was planed but I'm sure i will be cutting and chopping some were in the build. http://i1296.photobucket.com/albums/...ps94vvv6qk.jpg some of these parts will try to incorporate in the Foff... http://i1296.photobucket.com/albums/...ps6ruvava8.jpg Front AR60 http://i1296.photobucket.com/albums/...psvblsmpzv.jpg Yeti Transmission and the rear cage that's the plan.I need a place to put my electronics so i figure the box would be a good addition to the CBMS http://i1296.photobucket.com/albums/...pspm010zou.jpg Also going to see if this roll cage will be in the build.looking for something different and extra long Axial drive shafts to get the lenght i want between 13" to 14" http://i1296.photobucket.com/albums/...pskbdacq3g.jpg http://i1296.photobucket.com/albums/...psybimurqy.jpg front end in first on the agenda.......stay tune... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Very nice."thumbsup" Yeah FOFF's are best custom built, the Kyosho looks good, but 1/8 scale i really prefer. Its good you went to the trouble of thinking of a name, i thought of mine rather quickly, but my pro rig name took me awhile. I went from a swedish name because the chassis is from there, then back to an italian name. I admit the swedish name i liked more.:roll: Can't wait to see your build mate, i'm getting ready to move over to the USA, so hope to have it done before hand, if not i'll post the build from over there late next month. : ) |
Re: Project Crossroad Midnight Special Blingmobile First FOFF Build Quote:
found out yesterday that you can change your name in the Title on top of the screen and that's what i did not much of a change just added one word. Ya was working on it yesterday trying different thing and set up and i hope all goes well.Oh ya moving to USA.I hope you pick a warm state and which you well in your travel...Looking forward to seeing your Foff build... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build well let see well front end http://i1296.photobucket.com/albums/...psvblsmpzv.jpg here it's all sorted out and ready to be assembled http://i1296.photobucket.com/albums/...psshq7qkmc.jpg http://i1296.photobucket.com/albums/...ps62mgsoyh.jpg now for the rear end, ya lots of grease i did remove some of it. and ready for assembly http://i1296.photobucket.com/albums/...psqbwmv9o5.jpg when i was putting the rear end together i ran into a problem one of the 5x11x4 bearing would not fit in the straight axle adapter,so i had to grind it down..... http://i1296.photobucket.com/albums/...psftj7q85s.jpg http://i1296.photobucket.com/albums/...psfnbytr36.jpg [/IMG] as you can see in the photo you see the difference in length of the shaft still needed to be grind down on the inside... http://i1296.photobucket.com/albums/...psehuwet3d.jpg once that was all fix i needed small screws so i cut them down to finish the rear end had to cut 6mm... http://i1296.photobucket.com/albums/...ps1za59gex.jpg that it for now report back later for more... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Axles are looking great. Yes moving to a beautiful part of the usa on the east coast, going to be one hell of a life change, but really looking forward to it. Hope to find some nice spots for the Pro and Foff."thumbsup" |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Quote:
I.m sure it would be a big change for sure.you should have no problem to to find some RC clubs out were ever your going maybe Glamis in the dunes or unless your in the boonies like me...we have a club here but small mostly racing but not many are into the crawler thing.. |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Did some more work today and i notice something wrong with the rear end..Once I got the rear end all button I didn't like about those servo post ....they have to go.... http://i1296.photobucket.com/albums/...ps4kuasggd.jpg Now much better cleaner look the bling thing..... http://i1296.photobucket.com/albums/...psnearp88t.jpg http://i1296.photobucket.com/albums/...pspaub0yiz.jpg once they were cut i sanded down smooth and cover the hole with a 3mm set screw.Now i have a place to fill up the diff if need be... looks much better..... http://i1296.photobucket.com/albums/...ps9m5idixl.jpg |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build well I guess I hit another road block and i had a feeling this was going to happen.The width of the front AR60 is 270mm and the rear SCX10 width is 215mm with a difference of 55mm which 27 1/2mm a side.Now i have to get as close possible to the front width...http://i1296.photobucket.com/albums/...ps8myd77w6.jpg here you might get a better idea of what i mean.... http://i1296.photobucket.com/albums/...psmqqnk881.jpg http://i1296.photobucket.com/albums/...psqqebxq09.jpg here's my solution since i won't be going full out with this CBMS and only be using 2s and not like on 3,4,6's twist and break everything the first shot.I started up a thread on widen the rear end and members told me to use Beef tube or Jun-Fac wideners i thought to myself i have a pair here but these one are 14mm hex "about 4 years old" and they were to long so i had to make them fit..... http://i1296.photobucket.com/albums/...psvnfpff1r.jpg http://i1296.photobucket.com/albums/...psui7uupvf.jpg |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build well i couldn't help myself but i thought i give you just a few mock up of what I'm going for.This could be one or the other or both combine not sure still thinking of trying different thing.Also i may try the Wraith skid plate and mate it to the scx10 chassis rails to give it a wider stance.will have to see.. Anyways enjoy the mock ups...... http://i1296.photobucket.com/albums/...psfbzdv8fi.jpg http://i1296.photobucket.com/albums/...pssfdhphd3.jpg here on with the Yeti trans another option. http://i1296.photobucket.com/albums/...pshlvpjuig.jpg http://i1296.photobucket.com/albums/...pslgoz8tm4.jpg http://i1296.photobucket.com/albums/...ps8rh2hvgx.jpg http://i1296.photobucket.com/albums/...pszhfs2iwb.jpg http://i1296.photobucket.com/albums/...psoecsww0l.jpg one more don't want to give it all away...... http://i1296.photobucket.com/albums/...ps2xwyqhjr.jpgtomorrow I will be fabricating up the my own wideners for the rear diff.... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build I'm more into crawling, so will enter some meets when i can, and the Foff will be just for fun. Damn she's looking amazing so far..coming along fast well done! |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build ya was just checking and i notice that to and they were there to somebody must have erase them cause they are still in my photobucket and a big job to them back aagain.. some thing fishy.......... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Love the wheels and tyres, when you think you'll have it up and running? Oh just found out, Foff started back in Finland in 2005. History: RC Formula Offroad was born in the summer of 2005 in southern Finland. The very first competition was held in Tampere, Finland. In the wing of time, the sport has grown and grown. In 2007 there was the first RC Formula Offroad World Championship. - See more at: http://www.4x4offroads.com/rc-formul....kpwenHCU.dpuf |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Quote:
So the RC FOFF that been around for about 10 years.How about the real FOFF ... AS for running hopefully by the time the snow falls..I'm in no rush I have about 10 machine here but i don't have an FOFF... |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build Its going to be a good looking machine, with all that color I would get some flashier wheels for it though. JM2cts, good lookin rig man. |
Re: Project Crossroad Blingmobile Midnight Special First FOFF Build I think the wheels look great, i suppose they will hardly be seen when they are churning up sand. |
All times are GMT -6. The time now is 11:12 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com