Skippy | 08-15-2005 09:38 PM | jeep tlt shocks real esc and servo winch, 4 link pics 5 Attachment(s) Hey guys and gals. I have put tlt shocks on with L shaped brackets made out of stainless. I made the 4 link set up out of tie rods and L shaped brackets made out of stainless. I used all 3mm screws. For an esc I used a tazer, I got some wire and made a Y harness and wired both. I cut the tires. I put a deans plug on the batter. I used an futaba Atack radio 4 channel. For a winch spot I cut out the batter box area on the top and the front side. I mounted the 3003s futaba servo in that area, and drilled a hole in the chassis for the cable. I took out the steering gears and steering motor and cut down all of the mounting points. Then I took the high-speed gear out and put the servo mount there. Then I mounted my servo with the 1 bolt and servo tape. I used tie rods for steering links. I added a 1/3 inch body lift. I plan to clean every thing up and add some bracing. Down the road I plan to make a chassis. If you have any questions I will have no problem answering them. |