RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   General Crawlers (http://www.rccrawler.com/forum/general-crawlers/)
-   -   What next from Axial? (http://www.rccrawler.com/forum/general-crawlers/147698-what-next-axial.html)

TexasSP 12-05-2008 10:31 AM

What next from Axial?
 
Just a curiosity type discussion here.

With the new trucks coming from Losi and Venom and I am just wondering what is on the horizon for Axial? Obviously both Venom and Losi have developed there platforms from the Axial formula and a lot is owed to Axial for there obvious advancement of the rc crawling hobby but I would think something would have to be coming on there part to keep up with the new competition.

Both Losi and Venom have really raised the bar in my opinion.

Pdog7 12-05-2008 11:15 AM

Hopefully Axial will come out with something cool, maybe a 1.9 rig.

fwilly 12-05-2008 12:23 PM

I'm hoping for a comp worthy 1.9 with worm gears

The Real Dogman 12-05-2008 12:24 PM

Axial is coming out with a 1.9 scaler. Killer chassis!

BILLYGOAT 12-05-2008 12:32 PM

IF I HAD TO SPECULATE, I WOULD SAY AN SWX PRE BUILT ARTR OR KIT COMP READY WITH SOME SORT OF AXIAL DIG . CAN YOU SAY BENDER SIGNATURE EDITION"thumbsup"

TexasSP 12-05-2008 12:37 PM

I was more or less aiming at the 2.2 competition crawler market. With these latest releases I would think that Axial would be working on something to answer the new competition with.

2JSC 12-05-2008 01:51 PM

If anything after the 1.9 scaler, Axial is going to get back to the comp rig. A SWX roller would be sweet.

ThinkTank 12-05-2008 03:28 PM

Quote:

Originally Posted by TexasSP (Post 1459157)
I was more or less aiming at the 2.2 competition crawler market. With these latest releases I would think that Axial would be working on something to answer the new competition with.


Like a 2.2 MOA truck? The HR axles pretty much cover that.
Worm gears? Well the RF was released, the Losi is coming and RC4WD has been working on them.

Given the cluttered 2.2 market, I think Axial has been working on mini-SWX to give the Losi Mini-Crawler competition in the relatively untapped 1.9 Comp Arena.

RC Shocker 12-05-2008 03:56 PM

Axial is planning on adding the SCX10 sold as a kit priced around $450. Scale set up no doubt. Should show up on 1.9 wheels with ProLine rubber.

Maybe a 2.2 comp sometime after that. Fingers crossed.

TexasSP 12-05-2008 03:58 PM

The SCX10 is on preorder from The Crawler Store for 270, so where does the 450 come into play?

Timmahh 12-05-2008 04:00 PM

i can see where Losi may of raised the bar, and venom to a point, but no where NEAR as much. Personally i class venom, JUST ABOVE Itnegy, which is the WORST Of the WORST.

the new axial 1.9 scaler looks really good! i think the next big item wont be from any of the current suppliers of crawling units.

montana.matt 12-05-2008 06:23 PM

Quote:

Originally Posted by TexasSP (Post 1459414)
The SCX10 is on preorder from The Crawler Store for 270, so where does the 450 come into play?

$450 is probably the MSRP...

montana.matt 12-05-2008 06:24 PM

Quote:

Originally Posted by Timmahh (Post 1459415)
i can see where Losi may of raised the bar, and venom to a point, but no where NEAR as much. Personally i class venom, JUST ABOVE Itnegy, which is the WORST Of the WORST.

the new axial 1.9 scaler looks really good! i think the next big item wont be from any of the current suppliers of crawling units.

So you have the new Venom crawler then?

RC Shocker 12-05-2008 07:26 PM

Quote:

Originally Posted by montana.matt (Post 1459438)
$450 is probably the MSRP...

But of course. "thumbsup"

Rockthrasher 12-05-2008 07:52 PM

Quote:

Originally Posted by BILLYGOAT (Post 1459152)
IF I HAD TO SPECULATE, I WOULD SAY AN SWX PRE BUILT ARTR OR KIT COMP READY WITH SOME SORT OF AXIAL DIG . CAN YOU SAY BENDER SIGNATURE EDITION"thumbsup"

I was thinking the same thing. A signature edition w/dig would awesome.

TexasSP 12-05-2008 08:57 PM

Quote:

Originally Posted by BILLYGOAT (Post 1459152)
IF I HAD TO SPECULATE, I WOULD SAY AN SWX PRE BUILT ARTR OR KIT COMP READY WITH SOME SORT OF AXIAL DIG . CAN YOU SAY BENDER SIGNATURE EDITION"thumbsup"

This is really what I was after. What will be Axial's answer to the new competition on the block.

As for the negatives against Venom, yes they have had less than desirable products in the past. However, they in recent times have really improved and are starting to innovate.

vcar1 12-06-2008 07:58 AM

Axial's answer
 
http://www.active-hobby.com/axial/ax10_clj.html

BILLYGOAT 12-06-2008 09:10 AM

Quote:

Originally Posted by vcar1 (Post 1460386)

THOSE SILLY BELLYDRAGGERS.:lol::lol::lol:

Timmahh 12-06-2008 09:16 AM

no i dont. and i likely wouldnt own it. my past experience with venom gear is only slightly better than a migraine.

know too many folks that have had a bad experience like i have, so personally i wouldnt spend the money. they deffinatly made a some nice innovations (as noted) as standard on the rig, and i hope it preforms/holds up as good as it looks, but i wont be holding my breath. lol

Past first hand experience is hard to overcome. once you ve been cheated on, its hard to keep that trust level up eh?

clayton78 12-06-2008 06:09 PM

You couldnt say it better Timmahh.


All times are GMT -6. The time now is 09:20 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com