Desert Rc | 03-01-2009 01:30 PM | BEC Mamba troubleshoot Hey guys just wondering if you guys might be able to help me out. I had everything working and I was switching receiver and when I turned on the new receiver I got no response only to find I had the plugs in upside down. So through my trouble shoot I hooked back up my old receiver and everything came on my mamba and all went through the series of beeps. I still had no throttle then I noticed that I had the esc and the BEC swapped. I switched the plugs so they were correct but now I am getting absolutely no response from the esc. No lights or anything....all my connections and solders are solid. Do you think that I burned up the bec or something.
Any suggestions would be appreciated. Nothing I am doing seems to get the esc to come to life. There was no smoke and I still have functioning esc lights and steering is working correctly. |