New Arrows chassis for MOA HR axles So i was chosen to be a tester for a new chassis, thanks to saver for his chassis, i will try and do a good write up, i already received my mail from today and was surprised that the chassis was here already8). http://i66.photobucket.com/albums/h2...s/DSC04176.jpg I will take apart my mfm BW and use the axles on this build, i will have to fab some links(not my favorite part:roll:), but that's about it, specs.c Target wb 12.5" Twin 35t motors C.C. sidewinder C.C. BEC TP servo 946 Dig f/r Panthers Eritex comp heavies http://i66.photobucket.com/albums/h2...s/DSC04178.jpg http://i66.photobucket.com/albums/h2...s/DSC04180.jpg First impression, it's that it is very light and smaller than the MFM B.W. http://i66.photobucket.com/albums/h2...s/DSC04181.jpg http://i66.photobucket.com/albums/h2...s/DSC04182.jpg |
Looks Good. What kind of skid does it use? |
Thanks for the props, i received my chassis without a skid, this is a tester and saver is looking for input from us to design and fab a skid for it, i will be making my own, similar to the one from the mfm B.W. |
Is it done yet? |
Any updates? How is the build going? Jason |
Sorry, i haven't updated this build, we had this past week as holy week and we have vacation for the entire week, before that i had only done the skid plate since it didn't come with one, i will post my progress this next week, hopefully should be finished by tuesday"thumbsup" |
Can't wait to see the updated pictures!! "thumbsup" Jason |
So i started working until yesterday late in the afternoon and today in the a.m. , i had look everywhere to get the cutting board the thickness i needed:roll:, but i finally got it and got to work, hereare the progress pics. I wanted a skid a little wider then the mfm one but narrower than the stoc axial. http://i66.photobucket.com/albums/h2...s/DSC04205.jpg Size comparo with mfm chassis before dissasembly. http://i66.photobucket.com/albums/h2...s/DSC04208.jpg axles out http://i66.photobucket.com/albums/h2...s/DSC04209.jpg Mfm b.w. chassis served me well"thumbsup" http://i66.photobucket.com/albums/h2...s/DSC04210.jpg axles mounted up http://i66.photobucket.com/albums/h2...s/DSC04214.jpg Rear axle clocked http://i66.photobucket.com/albums/h2...s/DSC04215.jpg Front axle straight http://i66.photobucket.com/albums/h2...s/DSC04216.jpg Panthers mounted up a little over 3 1/2" clearance, i have to paly around with shock position and or limit the shocks travel. http://i66.photobucket.com/albums/h2...s/DSC04217.jpg http://i66.photobucket.com/albums/h2...s/DSC04218.jpg Flex shot http://i66.photobucket.com/albums/h2...s/DSC04219.jpg http://i66.photobucket.com/albums/h2...s/DSC04220.jpg |
I can't wait to see how you get all those electronics in that chassis w/o any cross braces to mount an electronics plate. Nice lookin build though"thumbsup" |
Looking good!! What length shocks are you running? -Jason |
Quote:
Quote:
|
Now with 3.5" shocks So i looked around for shorter shocks and i had some 3 1/2" shocks ,i installed them and now my belly clerance is 2 7/8", looks good to me, i will install electronics and test it tomorrow, sorry for the crapy night pics, my cameras flash is toast. http://i66.photobucket.com/albums/h2...s/DSC04222.jpg http://i66.photobucket.com/albums/h2...s/DSC04223.jpg http://i66.photobucket.com/albums/h2...s/DSC04224.jpg http://i66.photobucket.com/albums/h2...s/DSC04225.jpg |
Those shorter shocks seemed to help out alot. Can't wait to see it finished!!! Jason |
Well here are a couple of pics of how the electronics would be mounted, for now anyways, i still habve to clear all that wiring and i also still have the rear axle i can put any of the components on in case i don't like how the rig handles, but so far the test run it seemed very capable for the low belly clearance and incredible stable, i had only ran different chassis with 4" shocks and the arrows drives really well, i was also impressed on the flex, around 60 degress when the shocks are fully compressed, it feels very predictable, although i also feel that it needs upper braces to protect the chassis from bending in case of a hard tumble(i braced mine with tlt braces and spacers). I should be able to get some video monday"thumbsup" http://i66.photobucket.com/albums/h2...s/DSC04227.jpg http://i66.photobucket.com/albums/h2...s/DSC04228.jpg http://i66.photobucket.com/albums/h2...s/DSC04229.jpg http://i66.photobucket.com/albums/h2...s/DSC04231.jpg http://i66.photobucket.com/albums/h2...s/DSC04232.jpg |
Well i managed to get some pics and maybe a minute of video before the camera batt died on me:roll:, thanks to Polo for helping on the video and almost killing himself out there on the rocks:lol:, i will have a better video on monday, but so far this chassis is pretty impressive, i feel it plants the tires very well on the ground/rocks, i also like that it absolutely uses all the shocks travel"thumbsup". http://i66.photobucket.com/albums/h2...h_MOV04233.jpg http://i66.photobucket.com/albums/h2...s/DSC04234.jpg http://i66.photobucket.com/albums/h2...s/DSC04235.jpg http://i66.photobucket.com/albums/h2...s/DSC04236.jpg |
Looking good Carlos!!! What shocks are those and what length links are those? So, the chassis is working out great? Keep us updated!!! Jason |
Sorry for the late reply, shocks are from a 1/10th redcat buggy , stock lower axial links and and some 1mm longer rod links on the chasiss end, i have some tlt aluminum links for the upper links, i have been testing it and imho i think this chassis is definetly a comp worhty contender, at least on my HR moa axles, i will have more video tomorrow, but you can't go wrong with this chassis and i would definetly get the skid with inboarded link mounts"thumbsup" |
Carlos, how is the build coming along? Any updates? -Jason |
Any comp results with this chassis yet Carlos? -Jason |
Hey Jason, i haven't been to the u.s. for any comps this year, but our local comps(we do use USRCC rules btw) my rig has been dominant, we have a couple tlt's and some ax-10 that we do comps with and my hr axles and Arrows chassis have always led the way"thumbsup", i'll look for some video that has been taken on the comps and post up. |
All times are GMT -6. The time now is 05:55 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com