What's wrong with my new Jeep???
 

Hello everybody,

Just got the 1:6 jeep. Put a battery in the controller and hooked up the big battery. Truck runs. But when I steer controller wheel to hard stop either direction the truck run full throttle in reverse! :x Anybody have any clue why this is happening? I am currently charging the 12 volt. My 9 volt controller battery is not new so maybe thats the problem. The truck seems really cool but this control problem is a big issue. Maybe going back to the store.... :neutral:

there are two little twist knobs on the controller twist the throttle one until the vehicle stops and it sounds like your new but hey everyone was new good luck and remember what i said its all about the knobs

New to Wally World toys but not new to R/C. I have 2 T-Maxx trucks, 1 E-maxx and a Stampede. Trust me the rock crawler is not performing correctly. Let me explain again. If I turn the steering wheel on the controler all the way to the left or right the truck goes into full throttle reverse! Why is the steering controlling the throttle? If I do not turn the steering wheel to full lock the truck performs normally.

lol ok now i understand i guess you should either return it or email nylint

Sounds more to me like the cantilever inside the controller that controlls the steering is hitting on the throttle linkage inside the controller.

For those that have taken these apart you'll see how closely they crammed stuff together inside the huge friggin controller :roll:

Do you have any pics of the inside of the controller??? Thanks for the help. :)

just take the screws out and pop the back cover off.

nothing will come flying out at you :lol:

Well I appericate it! I took the back of the contoller off...poked around a few minutes and put it back together. So far its working fine! No problems like before. ;-) Hmmm...hope it doesn't come back! :roll: