Burned Out Board HELP
 

Alright Here's my problem... while building my tube chassis crawler, I took the stock electronics and put them in a 4x2x1 project box and wired the motors and steering back up and now nothing works. I have a few options; 1.) One of you nice guys sells me your extra main board, or someone explains to me EXACTLY what I need to get to wire up the stock motors and steering if possible. Also keep in mind that as a poor college student cost is a big issue.



Also If anyone wants I have an extra Scorpion body chassis with shocks



PLEASE HELP ME :roll:



Andy

Is there a way you could post up pictures of your board? Other than that I would say just check all your connections to make sure they are good. But most importantly to make sure your battery is on and correcly. Pics would help though.

Leach

Oh trust me guys, its shot there the cap burst and and the actual board burned up

pics or it never happened!! ;-)


might be able to replace what got burned up.
plus we can see if it was wired correctly.

Well hell, i just ripped the main board out of my gf's spare crawler, check out the pix of the finished thing http://www.rccrawler.com/forum/general-crawlers/24283-check-out-my-nylint-rock-rod.html