11-28-2010, 06:12 PM | #1 |
Quarry Creeper Join Date: Apr 2010 Location: virginia beach
Posts: 280
| need some help/advice
here is my problem- axial trans with wheely king axles, the problem is driveshafts... what do i use or what do i need to make? thanks in advance... my driveshafts now are wk meets stampede and its just not workin, they are spinning free off the outdrive shafts on my tranny. |
Sponsored Links | |
11-29-2010, 10:09 AM | #2 |
Quarry Creeper Join Date: Apr 2010 Location: Natchez
Posts: 410
|
There is a sticky around here somewhere for that. I know maxx shafts fit the wk axles. Try doing a search for traxxas or maxx shafts to axial tranny or axles.
|
11-29-2010, 04:35 PM | #3 |
Quarry Creeper Join Date: Apr 2010 Location: virginia beach
Posts: 280
|
im am half tempted to put my pede tranny in my gc-3a chassis and call it a day, i really dont wanna, but i just might. however, if i go with the stampede steel yokes, will it make it work out? thats pretty much what i have come to. i never had any problems with my pede tranny setup, but i really like the way the axial sits in the chassis. |
11-29-2010, 05:01 PM | #4 |
Suck it up! Join Date: Mar 2008 Location: Arkansas
Posts: 11,652
| |
11-29-2010, 05:12 PM | #5 |
Quarry Creeper Join Date: Oct 2007 Location: Sheboygan
Posts: 326
|
I am running a r2d trans with wk axles. I tried a few options but the best was the MIP shafts for the ax10. They are indestructable! It will run you about $60 but it is well worth it. The part #'s are 9136 if you have dig and 8101 if you don't. Then you will need 2 of the 6mm adaptors which are # 8137.
|
| |