TXT/Clod CVD's with wheel adapters Has anyone installed TXT or Clod axle CVD's along with wheel adapters? I've got a set of Junfac 17mm adapters an to run those I'll need to find longer bolts to attach the wheels. Should be easy enough but I was wondering has anyone else run into this? |
Just use a #10-32 x whatever length bolt and lock washer and you should be fine. The bolt will thread right into the CVD's. |
Yea that's the current plan, to find a longer bolt. I was just wondering if anybody had done something different than that; used a different adapter or somethin. |
Usually whatever adapter you run will come with some extended hardware/barrel nuts to mount it. Since you have aftermarket axles, the adapter kit hardware likely won't work so you'll have to use the longer bolts. |
Found some longer bolts at a place on the way to work. "thumbsup" But now I have to wait all day to install them. :sad: :razz: |
All times are GMT -6. The time now is 07:42 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com