Need help with exo....
 

O'm looking to build an exocage on my scx10, and would like some suggestioms on what material I should use... Thanks!

Re: Need help with exo....
 

3/16 automotive brake line bent and brazed to your liking. Search around here for "how to" write ups..

Re: Need help with exo....
 

Automotive brake line hu, never thought of that one... Thank you

Re: Need help with exo....
 

I used scale brass from a model air plane store. Easy to bend and
Super easy to braze. And when you scratch it after a wile it
Rusts ( or oxidises ) like are lady liberty. Kinda orange green
My roof rack on my cco1 is brass . Super real dents and damage

Re: Need help with exo....
 

im just about to start an exo on my honcho and im using 3/16" solid rod.. can be brazed easily or mig welded. im going to start brazing mine and see how well it goes:lmao:

Re: Need help with exo....
 

Sounds super heavy!! Do you have any pics. Mig!! Wow.
Are we still talking 1:10 or 1:1! Lol

Re: Need help with exo....
 

Thanks for the help guys!

Re: Need help with exo....
 

my rock sliders arent that heavy actually.. i havent built the exo yet but plan on starting it very soon now that i have some more brazing rod and an extra tank of oxygen.

here's a couple pics of my rock sliders, they are mig welded together. if you look in the 2.2 scale builds section there are some vendors that mig weld their custom chassis' together.

http://i978.photobucket.com/albums/a...9/HPIM1417.jpg

i didnt actually weigh my sliders but they are probably only maybe 1oz each. the long pieces are 1/4" solid rod and the short ones are 3/16th.. if i steal my weighted rims off my ax10 and toss them onto my honcho then onto the scale it only weighs in at like just under 7lbs. each front wheel has 7oz and 4oz in each rear wheel so its quite a bit.