new vaterra Slickrock got a new slickrock for christmas... yes, i'm a bit new at this... this is my first crawler (smaller than 1:1 at least) and the price was right... outta the box it has pretty good flex... https://scontent-b-sea.xx.fbcdn.net/...67339507_n.jpg first mod, was getting rid of that flat grey and making it my own... https://scontent-b-sea.xx.fbcdn.net/...94122917_n.jpg cleaned up the wiring a bit with some small zip ties, and put it all back together... https://scontent-a-sea.xx.fbcdn.net/...39933786_n.jpg did some custom graphics on the roof, my own little design... hand painted... https://fbcdn-sphotos-h-a.akamaihd.n...45056062_n.jpg then i got some beadlocks and stock tires from a buddies g-made Sawback... scuffed up the front half of the beadlock and painted it white for an oldschool look... https://fbcdn-sphotos-b-a.akamaihd.n...42003185_n.jpg next i want to re-locate the electronics off of the rear axle, possibly put a servo on the rear and upgrade everything for rear-steer... here are some extra pics... https://scontent-b-sea.xx.fbcdn.net/...30170014_n.jpg https://scontent-b-sea.xx.fbcdn.net/...27779398_n.jpg https://scontent-a-sea.xx.fbcdn.net/...03570992_n.jpg |
Re: new vaterra Slickrock see if this video works... http://youtu.be/dynMsxdUr0M if not, here's the link... slickrock stair crawl 1 - YouTube |
Re: new vaterra Slickrock How's the product support for the slick rock? Up grades ie. Can't find much yet, or else I'd pick one up too |
Vaterra's website lists lots of parts and a few upgrades... and so far as I've seen a lot of mrc parts can be used as well... Sent from my SAMSUNG-SGH-I747 using Tapatalk |
Re: new vaterra Slickrock Nice to see something other than Slickrock grey. :) I just got my new Slickrock. I wasn't looking for a serious comp crawler, just a little fun rig to mess about with so it's just what I was looking for. Having said that though I think it just could surprise some "serious" crawlers. Just waiting for a few parts to arrive so I can finish my Slickrock which will have 4WS and carbon fibre body panels (real carbon fibre not imitation stick on stuff) among other mods. Already fitted HB Rovers on Axial beadlocks which make me realise just how poor the stock tires are. Only real frustration is trying to find a decent replacement motor. Doesn't need anything too strong, just a bit better than stock. John |
Re: new vaterra Slickrock Quote:
I think it might be a rework of the Losi Mini Rock Crawler"thumbsup" |
Re: new vaterra Slickrock took and added 2.5 oz. to each of the front wheels... went to the local wal-mart tire shop and the head tech is into RC stuff also... so he gave me a handful of used sticky weights... so i cleaned them up, removed the torn up tape on the back, and put some fresh 3M body tape on them, then stuck them onto the G-made beadlock rings... but the weather has been so crummy i haven't gotten to go outside and test them much at all... see if it really made a difference... on a seperate note... when i look at the parts list, under springs for the shocks, it shows 2 of each type of spring... but on mine i've got 3 of one spring rate, and 1 of a different spring rate... when i turn a corner to the right and punch it, i'll lift the right front tire clean off the ground and it will carry it around and around and around... lol... thinking i'm going to just swap out the factory shocks for some aftermarkets here shortly... but wondering if it was a goof up on Vaterra's part??? |
Re: new vaterra Slickrock I would drop your pinion gear1-2 teeth to compensate for the added rotating mass. I would also watch the motor temps during the first run real close until you get a feel for how it performs |
Re: new vaterra Slickrock Why do all these pics of slickrock not show. I see a couple but most are gone. rrrr |
All times are GMT -6. The time now is 09:34 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com