RCCrawler Forums - Need help!!

RCCrawler Forums (http://www.rccrawler.com/forum/)

- General Crawlers (http://www.rccrawler.com/forum/general-crawlers/)

- - Need help!! (http://www.rccrawler.com/forum/general-crawlers/489761-need-help.html)

Flippinrigs

03-31-2014 11:40 PM

Need help!!

I have an axial ax10/wraith conversion, and the servo (tried other servos) just goes crazy. It makes the noise like when its turning when its not and it wont turn at all. What can I do to fix it?

slim_chance

04-01-2014 12:04 AM

Re: Need help!!

Do you have an external BEC? Or if you do check to see if the servo horn is stripped out. Very possible if you are using a plastic horn. If so upgrade to aluminum.

tgh117

04-01-2014 09:06 PM

It sounds to me like you have stripped a servo gear out. Your best bet is to upgrade the servo to something new .

There are lots of options in tons of different vendors.

Reliable cheap servo seems to be a solar d772 from hobbypartz or good servo like hitc or savor you can get from rpphobby.

In my opinion I wouldn't bother replacing the gears in your stock servo.

Good luck

Natedog

04-02-2014 11:08 AM

Re: Need help!!

Quote:

Originally Posted by tgh117 (Post 4730948)

Yes, Hitec HS-7950TH with Axial or Robotronics clamping servo horn would be good replacement.

All times are GMT -6. The time now is 07:09 AM.