Help 1/24 crawler Hardbody plans
 

Hi!
Soo... I'd like to know what you guys think would be the best base for a 1:24scale hardbody conversion. I plan on using a Revel/Amt kit and some sort of mini/micro crawler. I have been looking at Axial scx24 and ftx outlander mini 3.0. I realy like the Axial but the scale seems too big if I dont want to make a Monster Truck. Are there any other options that might be better?

Re: Help 1/24 crawler Hardbody plans
 

I wouldn't go with the SCX24, partially because it uses worm gear drive. if you want something that will go fast, then you don't want the SCX24. I would reccomend this: RC Truck. It is 1/18 scale, but it can easily be made into 1/24 scale with smaller tires. It has been one of the most reliable small-scale RC cars I have. I'd look it up. I'm also thinking of designing some 3D printed parts to make it into SOA.

Re: Help 1/24 crawler Hardbody plans
 

the losi micro crawlers are smaller by just a little bit but they dont make them anymore and they will still kinda have the monster truck look though and they havent made them for a long time they do make clones though
here is one clone thats vary close to the losi size most of the rest are scx24 size

https://m.banggood.com/HSP-94480-124...-p-928462.html

they do make scale chassies for these so if you can work with that size tire than your in luck

Re: Help 1/24 crawler Hardbody plans
 

Thank you! After reading a little about it I bought the SG1801. They are ridicolusly cheap so what do I have to lose. From what I can tell the chassie seems almost identical to Ftx Outlander/cr24?

Skickat från min SM-A528B via Tapatalk

Re: Help 1/24 crawler Hardbody plans
 

cool dont forget to share when ya get it

Re: Help 1/24 crawler Hardbody plans
 

I will! Should have it by the end of next week

Skickat från min SM-A528B via Tapatalk

Re: Help 1/24 crawler Hardbody plans
 

Hi guys! So I got it home and after a short testrun I began cutting it up. Very pleased with the truck tho. It performs very well for the price! I started a new post for the project here:
https://r.tapatalk.com/shareLink/top...ink_source=app

Skickat från min SM-A528B via Tapatalk