SLOW build. (pieces parts)

[scorpion ax-10]

this thread will be slow moving as my funds will control how fast and /or how far this build goes. heres my start, tlt axles (not sure if i like them ill probably sell them and find axial axles) and the chassis is cut out of 4x4 vinyl fence post with seperate mounted lower link mounts (opinions on chassis design and material choice also appreciated) this is 100% a as low cost as possible build as i am 16 with no job (not my choice) but need to fufill a crawling addiction..so on to the pic....

[lil' losi]

thats a good idea with the fence post material just pe sure to enforce it with cross members to prevent breaking
lookin forward to seeing this thing come together
glad to see im not the only one trying to build on a budget

[scorpion ax-10]

thanks, ill have a couple more pics up later today, i put in a couple crossmembers and toed in the frame on the ends, to allow for shock clearance because the frame is so wide, and i got some parts on the way that should be here tuesday.

[scorpion ax-10]

and the pics:

[bob1961]

very cool and neat idea but i think it will flex way too much as a crawler chassis, maybe even snap being PVC........bob

....

[scorpion ax-10]

ill be making more cross-members, where is the problem at this current moment, being that i still need a lot (tranny, links, driveshafts, and a tx+rx) im not sure where im mounting everything yet, when i get everything in i will figure out where to mount and how to strengthen....thanks for the thoughts though i appreciate them, keep em coming please...

[scorpion ax-10]

some updates, finally sorry, funds are out now. and pry will be for a while but im doing what i can. got some parts, (there is 4 tires) and since have modified the springs/shocks. whatcha think. (gave 40 for all shipped thanks friscokidd)

[scorpion ax-10]

oh and i have a stock axial speed control and a 27t motor also, (pry gonna get rid of that motor), and the shocks have newbright springs now and i really like how they work off the rig i just hope theyre good on the rig. heres all of what i have (extra springs are pry gonna go as well) and my workspace, a modified closet, yes.

[LR3]

Looka like a great start. I will be watching this one close

[dont slow down]

Brownie points for creativity, motivation, and work space.

[scorpion ax-10]

well thanks. like it says itll be slow cause of funds but im trying

[1qwkfox]

Look like a nice start!

Worse case if it breaks you can rebuild it how you want it an have all of
your gear already.

[Jeepkid]

Alright, I think I got some stuff to throw your way.

[scorpion ax-10]

Thanks, oh btw sorry about the crappy pics, i take em with my phone, which is worth as much as a paperweight as it is a phone.... (stupid sprint)

[scorpion ax-10]

Well its been a while since ive updated, havent gotten anything done really, but i did come across some funds recently and will be sending the payment for a Venom Creeper roller today, will have pics of it when it gets here and all set up

[scorpion ax-10]

CREEPER'S HERE!!! got it monday will have pics up later...

[scorpion ax-10]

so first off, the body it basically started like this:


and is now like this: (rear is going to get dovetailed)


and a list of mods so far;
-Permanent locked front and rear (stock) diffs (i put a space inbetween the "lock ring" and the bearing)
-modified front suspension and links (AX-10 springs re-located mounts and longer links)
-and electronics, axial ae-1 esc, axial tx/rx, integy 55t (27t is on shelf), and a towerpro mg946r hi torque servo

body-off shots to come

[scorpion ax-10]

updates:

[scorpion ax-10]

i hope to eventually get a Honcho bed for the rear

[scorpion ax-10]

Flatbed??? (its a temporary cardboard/ Duck Tape) whatcha think???



(marker is suppose to resemble a window)