Light scale rigs suspension and foam set ups. I need some input to set up a very light truck right. The truck has a very short wheelbase (10.5), I really like the challenge of trying to make this thing works. I can't complain too much about it, for its size the performance are pretty amazing, especially in very technical spots, climbing is a bit of an issue but I'm sure it could be improved with the right suspension set up and foam Here are the specs - Chassis: SCX10.2, mostly stock besides aluminum shorter links, a G10 SWB chassis, brass knuckles, I tried to keep as many parts plastic... - Weight: I would say it's 4 Lb max - Tires: Pitbull Rock Beast with Pitbull foams on Incision plastic wheels - Electronics: 2200 3S battery with SW4 and Revolver V2 Snubnose - Suspensions: Dravtech shocks with Losi Mini T springs (black front and pink rear), AE 15WT oil all around, rear VP Antirocks (they do help a bit tame the rear end while climbing). When it sits, there's maybe 80% droop front and 50% rear, shocks are same length and use the same mounting positions front and rear Build thread: http://www.rccrawler.com/forum/1-9-s...core-sami.html Again, I'm really happy with its performances, i was not expecting to follow comp or even C3 rigs with this thing. I feel that the rear suspensions are pretty stiff, also sits maybe too high. As for the foams, C.I. makes a few for this particular tire but they all seem too hard for the light weight application. Thanks in advance for your input. Gilles |
Re: Light scale rigs suspension and foam set ups. You can cut some of the foam out to make it softer. Sent from my SM-N950U using Tapatalk |
Re: Light scale rigs suspension and foam set ups. My barrage works really well on stock memory foam in the Axial ripsaws. Springs are a bit soft, but Axial scx springs fit, but a bit loose |
Re: Light scale rigs suspension and foam set ups. My suspension set up is pretty close to this, I just ordered some Hyrax with the same foams, I believe (https://www.amainhobbies.com/crawler...r-2034/p638324) Looks like you're shaving half of the foams' outer diameter. Quote:
|
All times are GMT -6. The time now is 03:09 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com