Re: My comp purpose Venture
 

As we are getting closer to take part to G6 Revon in Italy, last minute touches are being made.Front aluminum bumper holder and a hook to have something to be grabbed from.And not to forget, general switch wich cuts off power even with the battery pluged in.Stay tuned, more to come
https://uploads.tapatalk-cdn.com/201...83500ffd73.jpghttps://uploads.tapatalk-cdn.com/201...ecde6133a8.jpghttps://uploads.tapatalk-cdn.com/201...39776d602a.jpghttps://uploads.tapatalk-cdn.com/201...7c4fc2704e.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

So as G6 Recon in Europe is getting closer, I am almost done with my rig.Added a full interior and 2 warrior driver and co-driverhttps://uploads.tapatalk-cdn.com/201...0a77772094.jpghttps://uploads.tapatalk-cdn.com/201...1816588d5f.jpghttps://uploads.tapatalk-cdn.com/201...3b3b5203b3.jpghttps://uploads.tapatalk-cdn.com/201...f67cafe4d7.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

Back from G6 Recon in Italy, the truck performed outstanding, did the 12 hours gix endure with no breakage,the car went smooth, also passed with success the next day TTC Challenge.After this event, the HPI Venture is now G6 Recon Certified

Re: My comp purpose Venture
 

This is how the car looks after G6.I had couple of screws loose and 2 missinghttps://uploads.tapatalk-cdn.com/201...2bf4fdaa2d.jpghttps://uploads.tapatalk-cdn.com/201...6d0deb9a74.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

Homemade wheel wells?


Sent from my SM-G965W using Tapatalk

Re: My comp purpose Venture
 

Yes, 3d printed

Re: My comp purpose Venture
 

What a shame haha. Been waiting for someone to release some

Sent from my SM-G965W using Tapatalk

Re: My comp purpose Venture
 

Well I can print you some if you want.I haven't see any on the market yet

Re: My comp purpose Venture
 

That would be nice! How much? Also I live in BC Canada so shipping may be a bit too much for meSent from my SM-G965W using Tapatalk

Re: My comp purpose Venture
 

I will be checking the postage for you and see whats the shipping cost

Re: My comp purpose Venture
 

After running the G6 in Italy, my front aluminum bumper holder, started to get used and the holes where bigger because of the abuse that the front stinger fot, so I decided to replace it with solid metalhttps://uploads.tapatalk-cdn.com/201...1179f10ea6.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

This weekend I attended a local comp, 2nd place in Hill Climbing and 2nd place on Team Trial.Cvd's is all she needs!!!!https://uploads.tapatalk-cdn.com/201...523206c5b2.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

Power up, Tekin 3100kv ROC412HDhttps://uploads.tapatalk-cdn.com/201...51f9621f4b.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

I am in touch with Frank from HPI and he said that Christmas Sale would be the release date for them.Hope that's true:mrgreen:

Re: My comp purpose Venture
 

I think I had 5 minutes of runtime with the new motor.Conclusion?Could be to much to handle?Or it was just time to give up after 1 year of hard trailinghttps://uploads.tapatalk-cdn.com/201...8a2bdfda4a.jpghttps://uploads.tapatalk-cdn.com/201...7da6cf1c3c.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

We made it on the official HPI webpage, it feels awesome!!!!!

https://www.hpiracing.com/en/article/view/2018091202

Re: My comp purpose Venture
 

After breaking the rear diff I decided to shim the atack pinion so I added teo shims on each axle on the outside, just before adding the driveshaft
https://uploads.tapatalk-cdn.com/201...bfe12e4330.jpghttps://uploads.tapatalk-cdn.com/201...f5d892ddbd.jpg
The motor is a real beast, so I had to gear it down, using a 17t pinion, this is the smalest I could get on the 5mm bore and swapped with the optional spur 60t
https://uploads.tapatalk-cdn.com/201...62500a86ab.jpg
Also, after running the G6 in Italy and the 12 hour fix enduro, I haven't open the trandmision, so I had to do it. What I found inside, was a mess, but evrything was working, so cleaned the old grease and replaced it with a new one. Everything is perfect now. Waiting to see how it handles on the rocks
https://uploads.tapatalk-cdn.com/201...43a24e273f.jpghttps://uploads.tapatalk-cdn.com/201...35c9c4083f.jpg

Sent from my SM-G955F using Tapatalk

Re: My comp purpose Venture
 

On the idler gear, I replaced the stock one( 60t I believe) with the hot racing 58t gear. The stock bearings don’t fit my 58t gear Did you run into that problem?

Re: My comp purpose Venture
 

I was told by another member to reach out to you about your inner fenders. I’m curious how much you would charge to print me some. PM me so we can talk about it. Thanks!


Sent from my iPhone using Tapatalk

Re: My comp purpose Venture
 

CVD's are on, hoping for improved steering anglehttps://uploads.tapatalk-cdn.com/201...e65af0f40d.jpg

Sent from my SM-G955F using Tapatalk