Servo mount for "trail" rig I bought a Crawler King for my son ($119 at Tower). He is 6 years old and it is perfect for his monster truck obsession "thumbsup" After his first drive with it, I adressed the torque twist by adding some fuel tubing inside the shocks and going to 40wt front fluid and 60 wt rear. It drives much better now. Next issue is the steering. I see various front servo mounts available, but I'd like to retain as much compression travel as possible. While he has some interest in basic crawling, he also likes to just bash and pund the truck around. This means he is occassionally catching some air, so the suspension is doing more than just side-to-side. I've seen the EEM and the CKRC setups. Without having them in front of me, I can't tell how each will affect the compressin travel available before the servo hits the battery compartment. So, what setup will give me the best results for this? I may be interested in going 4-link also, so if that opens up any additional possibilities for the steering, let me know. Thanks all!! |
Quote:
|
Quote:
|
Anybody else have input? The steering on this thing needs help :ror: |
Upgrade the stock servo to a stronger hi speed hi torque servo, change the plastic steering components with aluminum so there is no play or slack in the steering linkage. |
Quote:
|
It wont match it by any means, but it helps. Take it out with the stock steering linkage and when you get in binds or try and turn on an incline look closely and you will see the plastic parts flexing. It does help, my little brother didnt like how gaudy the soa looked so he got the strc aluminum and put a hi torque servo and a longer servo horn, it improved it over the stock set up. |
Quote:
Oops, just uppers, so you have a 4-way link suspension |
Quote:
|
Now you won't be able to have the stock steering though. If I remember right the stock steering axle mount uses the same mounting holes as the EEM 4 link bracket. |
I ended up cutting my own servoe bracket using the "JPSONOMA" template. It places the servoe super close to the top of the axle. It seems this is my best bet for good steering and minimal loss of travel. |
UPDATE w/Pics I figured I'd post an update of what I ended up doing. This is the first crawler I've worked on, but not the first RC vehicle. I ended up making my own servo mount based on a template from this forum. I chose this design because the servo literally yas on the top of the axle, preserving as much clearance as possible. I also made all my own steering links and tie rods front and rear. I used Revo ends, 8-32 all thread, and stainless tubing. While I was at it, I installed a 4-link kit and Delrin lower links from EEM. I'm pretty happy with the way it all turned out and it steers SOOO much better now "thumbsup" FRONT http://www.nuibe.com/rc/ck/ck_servo_mount.jpg http://www.nuibe.com/rc/ck/ck_steering_front.jpg REAR http://www.nuibe.com/rc/ck/ck_rear_1.jpg http://www.nuibe.com/rc/ck/ck_rear_2.jpg Did I make any major mistakes? |
Thats interesting how you linked the rear lock out to the axle. Better than the stock location (less play), but I would worry about that stress on the axle housing cracking it. What 4 link kit is that and do you notice much difference over the stock 3 link? |
i really like that, well done. i find myself in the same boat as you. waiting on my servo mount to come in the mail... im interested in your findings with the 4-link kit, and a link wouldn't hurt either. also, what servo saver is that? the stock? or is it just a horn that came with the servo? -jon |
Quote:
Here's a link to the 4-link kit: http://www.eastendmachining.com/crki4kitsi1.html And here are the cool Delrin lower links: http://www.eastendmachining.com/crkideli.html |
Quote:
|
Quote:
|
Re: Servo mount for "trail" rig HOLY thread resurrection Batman! A BIG!!! shout out to "kazuaki"... without your post and pictures I would still be wondering how to tackle the mod on the cheap. I too bought a Crawler King for my kids and have dealt with the abysmal steering. My search across the web led me here as most other fourms/threads are vague and without pictures. I am very happy with the results from my ghetto fantabulous follow along. Purchased the servo off eBay ($10). Its a cheap "TowardPro" (as opposed to TowerPro) metal gear variety with TONS of torque. It gets a bad rep across the internet, but for a crawler - its just right - I have not encountered any centering issues at all. I dont think I would put it into my Blitz's or anything that goes airborne though. Bought the mounting plate off eBay as well, the usual price, approx. $15 shipped. Its a Wheely King axle mounting plate but the CK and WK share the same axles...perfect fit. I simply used the included servo horns and screws to my liking and this is what you have. It works AWESOME! Yes, McGuyver'ed like this works, and it works well. Its just a simple hole drilled into the steering link after being marked by hand quickly. The stock steering linkage is so flexible it actually helps. The thing bashes like hell now, its almost unstoppable and the crawling is now what it should have been out of the box. Its the best of both worlds for little ones just entering the hobby. Its fast enough to go at a good walking pace but if you need to slow it down and crawl its ready:) I'lll address the 4-link upgrade soon but it does fine as its pictured and nothing is in the way. I also put 40w oil all the way around in the shocks and torque twist to the right is almost non existent. It wheelies better and more correct now. Total cost for everything to make it happen.... $25 bucks http://i45.tinypic.com/b4uxpv.jpg |
All times are GMT -6. The time now is 06:19 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com