04-07-2009, 02:33 AM | #1 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
| sw3 Wk comp crawler
Getting back into crawling and got a pretty good deal on a complete rtr comp ready wk but it looks like garbage. so i am rebuilding from the ground up! here is his list of stuff he said is included cool! list of parts -Panther cougars -Axial rockstar rims, weighted -MIP CVD's -JP custom Rc's hubs, carriers -Custom servo mount -High torque servo -traxxas front links -Custom front flat draglink -10 cell 2/3 amp battery pack (not my idea i have a 5 cell here i am going to make two packs a 8c and 7c for comps. and eventually pick up some ckrc lipos)! -castle BEC -Caste Sidewinder -Deans plugs -DNA four link mount -Solid billet lockers, hardened gears -Axial shocks -TCS internal springs -35T motor -Axial ax-10 tranny -DNA dig, set up with servo -TQ3 system, with 3rd 3 way switch -Alum rear lockouts -3rd channel pot adjuster -steel yokes -Vertical smile chassis -Bent rear links -Rockstar body, betty body (dovetailed rear) as you can see it needs work but what crawler dose not ***MY PLANS*** Bta steering (i am going to try dont know if its do able) i want to get that servo low on the axle and run the servo on one side with the batt on the other side and run the elecs either on the chassis or rear axle. Sw3 chassis (i picked one up off ebay) ditch the droop and run revo shocks to get it low! new radio gear (m8 spektrum!) new revo links (steel for some weight down low!) clean up wiring Chassis should be here in the next day or so it shipped from inside cali and should only take one two days so wednesday the latest. here is a pic he listed in his auction for the sw3 here is a pic if the wk i bought. *its ok i got a deal |
Sponsored Links | |
04-07-2009, 03:15 AM | #2 |
Quarry Creeper Join Date: Jun 2005 Location: Northern CaliFOOLya
Posts: 380
|
looks about as good as you doo =|
|
04-07-2009, 03:16 AM | #3 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
| |
04-07-2009, 03:17 AM | #4 |
Quarry Creeper Join Date: Jun 2005 Location: Northern CaliFOOLya
Posts: 380
|
burnt to a crisp =[ but paybacks a biiiiiii camyno300 (2:16:46 AM): rephresh ShadezTheTitan (2:17:39 AM): ive been on rcc longer then you ShadezTheTitan (2:17:41 AM): ****in newb camyno300 (2:17:55 AM): roflcopter |
04-07-2009, 03:19 AM | #5 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
| |
04-07-2009, 05:17 PM | #6 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
chassis didn't show but I went digging through my old parts boxes and found some t maxx shocks and some springs and I have a bunch of revo links I am going to bend for the rear and I have revo push rods for the front going to need to figure out uppers.and I got a tracking number on my wk should be here soon
|
04-07-2009, 09:27 PM | #7 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
Painted a body and bent the rear lower links for the sw3 right now using a dotsun 510 abc body haha cars ftw! should look cool something different atleast. wk is Scheduled Delivery: 04/13/2009 and my sw3 chassis will be in tomorrow its in sac right now im only an hour and a half away! |
04-08-2009, 01:11 PM | #8 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
chassis was re routed dilivery tomorrow stupid ups gosh!
|
04-09-2009, 04:20 PM | #9 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
pictures of the gear i have gathered for the build body i am going to run |
04-10-2009, 12:47 PM | #10 |
RCC Addict Join Date: Nov 2007 Location: -
Posts: 1,134
|
whoa that is a freaking awsome crawler you are starting.You really threw some money to that thing. IM JELOUS |
04-10-2009, 01:20 PM | #11 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
| |
04-13-2009, 12:23 PM | #12 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
tracking says the wk is on my door step but i am stuck at work im going to do a work party tonight for sure! |
04-14-2009, 12:39 PM | #13 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
got the truck yesterday finished it around midnight and brought it into work today we have some big rocks here and ima get some pics and vid of it on those rocks. anyways back to work haha.
|
04-20-2009, 02:51 PM | #14 |
I wanna be Dave Join Date: Nov 2005 Location: Crawler practice!
Posts: 2,104
|
welp here are the pics here are some more pics new batt mount next is a new servo mount new full size servo for dig 4wd rear freewheel rear locked some tlt axle mounts and servo mounts worked great for mounting ok here are the pics starting the cutting used tlt servo mounts and some L brackets to mount it to the axle and i did a slight bend in it to clear the pumkin 8cell 7cell thats pretty close to 90* its right around 85* artic |
05-03-2009, 12:59 AM | #15 |
Newbie Join Date: Jul 2008 Location: Salida
Posts: 36
|
Not much of an actual wheely king left! |
01-22-2011, 02:07 AM | #16 |
Rock Crawler Join Date: May 2009 Location: Hillsboro, OR / Kapolei, Hi
Posts: 695
| 510!!!
Datsun 510 FTW!!! Nice build. Action vids? -B |
01-22-2011, 03:48 PM | #17 |
Quarry Creeper Join Date: May 2009 Location: Under Communist Occupation
Posts: 271
|
The 510 body is awesome. When I was a kid, we had one with LSD and SSS heads. Quick little sucker!
|
| |