|
| LinkBack | Thread Tools | Display Modes |
01-22-2012, 08:35 AM | #1 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Crawler King HC Lower Links
Anyone know where I can get some high clearance lower links for a stock crawler king?
|
Sponsored Links | |
01-22-2012, 09:37 AM | #2 |
RCC Addict Join Date: Nov 2010 Location: nashville
Posts: 1,447
| Re: Crawler King HC Lower Links
I'm using integy axial links or you can make some with treaded rod and brake line that way you can make it any wheelbase you want.
|
01-22-2012, 09:41 AM | #3 |
RCC Addict Join Date: Nov 2010 Location: nashville
Posts: 1,447
| Re: Crawler King HC Lower Links
Just Google search integy links for axial. A bunch of lower links should show different options,
|
01-22-2012, 10:02 AM | #4 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Re: Crawler King HC Lower Links
So the axial lower high clearance links are the same as stock crawler king with stock knuckles?
|
01-22-2012, 10:48 AM | #5 |
RCC Addict Join Date: Nov 2010 Location: nashville
Posts: 1,447
| Re: Crawler King HC Lower Links
The have me a little longer wheelbase 12.5 I believe. I used the 114 mm ones
Last edited by King James; 01-22-2012 at 10:51 AM. |
01-23-2012, 04:56 PM | #6 |
Fan of wheelspeed Join Date: Jun 2011 Location: Southern IN
Posts: 3,369
| Re: Crawler King HC Lower Links
that longer w.b wont hurt you to bad Taurus. It may help keepin it from rolling over so easy too. Go to TCS crawlers, they have em on sale for like $4 for a whole set, they're green, but we can de-anodize them and polish em up nice n shiny for you. I have a full set laying on my workbench right now. They're good quality and should work just fine.
|
01-26-2012, 08:35 AM | #7 |
Newbie Join Date: Nov 2011 Location: broadlands
Posts: 2
| Re: Crawler King HC Lower Links
You can go to rc4wd and get lots of different length links. here is what I used. |
01-28-2012, 10:40 AM | #8 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Re: Crawler King HC Lower Links
Just put on my new axial middle bend lower links and I'm having a problem with the roll backwards and forwards of the axles. It is putting the driveshaft in a bad angle sometimes. |
01-28-2012, 11:29 AM | #9 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: Crawler King HC Lower Links
If you lengthened the lower links without lengthening the upper links it will pull the top of the axel towards the center of the chassis giving you terrible pinion angles. With pics we might be able to see to help.
|
01-28-2012, 11:50 AM | #10 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Re: Crawler King HC Lower Links
Yeah I only did the lower links. I didn't realize would have to do both. I have it set at a decent angle right now, it's just when u hit the gas the twists forward.
|
01-28-2012, 06:23 PM | #11 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: Crawler King HC Lower Links
If you are still using the original upper link , the mount bushing wears out. This could be causing the play, if you remove the screw that holds the link to the mount the bushing may fall out or be very loose.
|
01-28-2012, 07:18 PM | #12 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Re: Crawler King HC Lower Links
Here's what I ended up doing. Was it right? Maybe not. Does it work really good? Yes. Any opinions on this? |
01-28-2012, 08:58 PM | #13 |
RCC Addict Join Date: Nov 2010 Location: nashville
Posts: 1,447
| Re: Crawler King HC Lower Links
thatll definatly work for now i would still get saome new uppers still, make into a 4 link. and is the bend in the middle of the links or offset to one end
|
01-28-2012, 09:33 PM | #14 |
I wanna be Dave Join Date: Oct 2010 Location: Caldwell ID.
Posts: 4,328
| Re: Crawler King HC Lower Links
Nice, very creative. I am with jimmy get or build new upper links.
|
01-29-2012, 06:27 AM | #15 |
Newbie Join Date: Jan 2012 Location: Evansville
Posts: 25
| Re: Crawler King HC Lower Links
The bend is in the middle of the links
|
Crawler King HC Lower Links - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Crawler Innovations - Delrin High Clearance Lower Links | bigstu | Axial XR10 | 34 | 11-15-2011 04:03 PM |
What size Upper and Lower Suspension Links for a Wheely King and SW3? | wshipley | HPI Wheely King | 2 | 07-23-2007 04:10 PM |
| |